Legacy Resolver Compatibility for Delegation Signer (DS)
Status of this Memo
This document specifies an Internet standards track protocol for the Internet community, and requests discussion and suggestions for improvements. Please refer to the current edition of the "Internet Official Protocol Standards" (STD 1) for the standardization state and status of this protocol. Distribution of this memo is unlimited.
Copyright © The Internet Society (2004). All Rights Reserved.
As the DNS Security (DNSSEC) specifications have evolved, the syntax and semantics of the DNSSEC resource records (RRs) have changed. Many deployed nameservers understand variants of these semantics. Dangerous interactions can occur when a resolver that understands an earlier version of these semantics queries an authoritative server that understands the new delegation signer semantics, including at least one failure scenario that will cause an unsecured zone to be unresolvable. This document changes the type codes and mnemonics of the DNSSEC RRs (SIG, KEY, and NXT) to avoid those interactions.
The DNSSEC protocol has been through many iterations whose syntax and semantics are not completely compatible. This has occurred as part of the ordinary process of proposing a protocol, implementing it, testing it in the increasingly complex and diverse environment of the Internet, and refining the definitions of the initial Proposed Standard. In the case of DNSSEC, the process has been complicated by DNS's criticality and wide deployment and the need to add security while minimizing daily operational complexity.
A weak area for previous DNS specifications has been lack of detail in specifying resolver behavior, leaving implementors largely on their own to determine many details of resolver function. This, combined with the number of iterations the DNSSEC specifications have been through, has resulted in fielded code with a wide variety of behaviors. This variety makes it difficult to predict how a protocol change will be handled by all deployed resolvers. The risk that a change will cause unacceptable or even catastrophic failures makes it difficult to design and deploy a protocol change. One strategy for managing that risk is to structure protocol changes so that existing resolvers can completely ignore input that might confuse them or trigger undesirable failure modes.
This document addresses a specific problem caused by Delegation Signer's (DS) [RFC3658] introduction of new semantics for the NXT RR that are incompatible with the semantics in [RFC2535]. Answers provided by DS-aware servers can trigger an unacceptable failure mode in some resolvers that implement RFC 2535, which provides a great disincentive to sign zones with DS. The changes defined in this document allow for the incremental deployment of DS.
In this document, the term "unsecure delegation" means any delegation for which no DS record appears at the parent. An "unsecure referral" is an answer from the parent containing an NS RRset and a proof that no DS record exists for that name.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
1.2. The Problem
Delegation Signer (DS) introduces new semantics for the NXT RR that are incompatible with the semantics in RFC 2535. In RFC 2535, NXT records were only required to be returned as part of a non-existence proof. With DS, an unsecure referral returns, in addition to the NS, a proof of non-existence of a DS RR in the form of an NXT and SIG(NXT). RFC 2535 didn't specify how a resolver was to interpret a response with RCODE=0, AA=0, and both an NS and an NXT in the authority section. Some widely deployed 2535-aware resolvers interpret any answer with an NXT as a proof of non-existence of the requested record. This results in unsecure delegations being invisible to 2535-aware resolvers and violates the basic architectural principle that DNSSEC must do no harm -- the signing of zones must not prevent the resolution of unsecured delegations.
2. Possible Solutions
This section presents several solutions that were considered. Section 3 describes the one selected.
2.1. Change SIG, KEY, and NXT type codes
To avoid the problem described above, legacy (RFC2535-aware) resolvers need to be kept from seeing unsecure referrals that include NXT records in the authority section. The simplest way to do that is to change the type codes for SIG, KEY, and NXT.
The obvious drawback to this is that new resolvers will not be able to validate zones signed with the old RRs. This problem already exists, however, because of the changes made by DS, and resolvers that understand the old RRs (and have compatibility issues with DS) are far more prevalent than 2535-signed zones.
2.2. Change a subset of type codes
The observed problem with unsecure referrals could be addressed by changing only the NXT type code or another subset of the type codes that includes NXT. This has the virtue of apparent simplicity, but it risks introducing new problems or not going far enough. It's quite possible that more incompatibilities exist between DS and earlier semantics. Legacy resolvers may also be confused by seeing records they recognize (SIG and KEY) while being unable to find NXTs. Although it may seem unnecessary to fix that which is not obviously broken, it's far cleaner to change all of the type codes at once. This will leave legacy resolvers and tools completely blinded to DNSSEC -- they will see only unknown RRs.
2.3. Replace the DO bit
Another way to keep legacy resolvers from ever seeing DNSSEC records with DS semantics is to have authoritative servers only send that data to DS-aware resolvers. It's been proposed that assigning a new EDNS0 flag bit to signal DS-awareness (tentatively called "DA"), and having authoritative servers send DNSSEC data only in response to queries with the DA bit set, would accomplish this. This bit would presumably supplant the DO bit described in [RFC3225].
This solution is sufficient only if all 2535-aware resolvers zero out EDNS0 flags that they don't understand. If one passed through the DA bit unchanged, it would still see the new semantics, and it would probably fail to see unsecure delegations. Since it's impractical to know how every DNS implementation handles unknown EDNS0 flags, this is not a universal solution. It could, though, be considered in addition to changing the RR type codes.
2.4. Increment the EDNS version
Another possible solution is to increment the EDNS version number as defined in [RFC2671], on the assumption that all existing implementations will reject higher versions than they support, and retain the DO bit as the signal for DNSSEC awareness. This approach has not been tested.
2.5. Do nothing
There is a large deployed base of DNS resolvers that understand DNSSEC as defined by the standards track RFC 2535 and [RFC2065] and, due to under specification in those documents, interpret any answer with an NXT as a non-existence proof. So long as that is the case, zone owners will have a strong incentive to not sign any zones that contain unsecure delegations, lest those delegations be invisible to such a large installed base. This will dramatically slow DNSSEC adoption.
Unfortunately, without signed zones there's no clear incentive for operators of resolvers to upgrade their software to support the new version of DNSSEC, as defined in RFC 3658. Historical data suggests that resolvers are rarely upgraded, and that old nameserver code never dies.
Rather than wait years for resolvers to be upgraded through natural processes before signing zones with unsecure delegations, addressing this problem with a protocol change will immediately remove the disincentive for signing zones and allow widespread deployment of DNSSEC.
3. Protocol changes
This document changes the type codes of SIG, KEY, and NXT. This approach is the cleanest and safest of those discussed above, largely because the behavior of resolvers that receive unknown type codes is well understood. This approach has also received the most testing.
To avoid operational confusion, it's also necessary to change the mnemonics for these RRs. DNSKEY will be the replacement for KEY, with the mnemonic indicating that these keys are not for application use, per [RFC3445]. RRSIG (Resource Record SIGnature) will replace SIG, and NSEC (Next SECure) will replace NXT. These new types completely replace the old types, except that SIG(0) [RFC2931] and TKEY [RFC2930] will continue to use SIG and KEY.
- Consistent with [RFC3597], domain names embedded in RRSIG and NSEC RRs MUST NOT be compressed,
- Embedded domain names in RRSIG and NSEC RRs are not downcased for purposes of DNSSEC canonical form and ordering nor for equality comparison, and
- An RRSIG with a type-covered field of zero has undefined semantics. The meaning of such a resource record may only be defined by IETF Standards Action.
If a resolver receives the old types, it SHOULD treat them as unknown RRs and SHOULD NOT assign any special meaning to them or give them any special treatment. It MUST NOT use them for DNSSEC validations or other DNS operational decision making. For example, a resolver MUST NOT use DNSKEYs to validate SIGs or use KEYs to validate RRSIGs. If SIG, KEY, or NXT RRs are included in a zone, they MUST NOT receive special treatment. As an example, if a SIG is included in a signed zone, there MUST be an RRSIG for it. Authoritative servers may wish to give error messages when loading zones containing SIG or NXT records (KEY records may be included for SIG(0) or TKEY).
As a clarification to previous documents, some positive responses, particularly wildcard proofs and unsecure referrals, will contain NSEC RRs. Resolvers MUST NOT treat answers with NSEC RRs as negative answers merely because they contain an NSEC.
4. IANA Considerations
4.1. DNS Resource Record Types
This document updates the IANA registry for DNS Resource Record Types by assigning types 46, 47, and 48 to the RRSIG, NSEC, and DNSKEY RRs, respectively.
Type 30 (NXT) should be marked as Obsolete.
4.2. DNS Security Algorithm Numbers
To allow zone signing (DNSSEC) and transaction security mechanisms (SIG(0) and TKEY) to use different sets of algorithms, the existing "DNS Security Algorithm Numbers" registry is modified to include the applicability of each algorithm. Specifically, two new columns are added to the registry, showing whether each algorithm may be used for zone signing, transaction security mechanisms, or both. Only algorithms usable for zone signing may be used in DNSKEY, RRSIG, and DS RRs. Only algorithms usable for SIG(0) and/or TSIG may be used in SIG and KEY RRs.
All currently defined algorithms except for Indirect (algorithm 252) remain usable for transaction security mechanisms. Only RSA/SHA-1 [RFC3110], DSA/SHA-1 [RFC2536], and private algorithms (types 253 and 254) may be used for zone signing. Note that the registry does not contain the requirement level of each algorithm, only whether or not an algorithm may be used for the given purposes. For example, RSA/MD5, while allowed for transaction security mechanisms, is NOT RECOMMENDED, per [RFC3110].
Additionally, the presentation format algorithm mnemonics from [RFC2535] Section 7 are added to the registry. This document assigns RSA/SHA-1 the mnemonic RSASHA1.
As before, assignment of new algorithms in this registry requires IETF Standards Action. Additionally, modification of algorithm mnemonics or applicability requires IETF Standards Action. Documents defining a new algorithm must address the applicability of the algorithm and should assign a presentation mnemonic to the algorithm.
4.3. DNSKEY Flags
Like the KEY resource record, DNSKEY contains a 16-bit flags field. This document creates a new registry for the DNSKEY flags field.
Initially, this registry only contains an assignment for bit 7 (the ZONE bit). Bits 0-6 and 8-15 are available for assignment by IETF Standards Action.
4.4. DNSKEY Protocol Octet
Like the KEY resource record, DNSKEY contains an eight bit protocol field. The only defined value for this field is 3 (DNSSEC). No other values are allowed, hence no IANA registry is needed for this field.
5. Security Considerations
The changes introduced here do not materially affect security. The implications of trying to use both new and legacy types together are not well understood, and attempts to do so would probably lead to unintended and dangerous results.
Changing type codes will leave code paths in legacy resolvers that are never exercised. Unexercised code paths are a frequent source of security holes, largely because those code paths do not get frequent scrutiny.
Doing nothing, as described in section 2.5, will slow DNSSEC deployment. While this does not decrease security, it also fails to increase it.
6.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, March 1997. [RFC2535] Eastlake, D., "Domain Name System Security Extensions", RFC 2535, March 1999. [RFC2536] Eastlake, D., "DSA KEYs and SIGs in the Domain Name System (DNS)", RFC 2536, March 1999. [RFC2930] Eastlake, D., "Secret Key Establishment for DNS (TKEY RR)", RFC 2930, September 2000. [RFC2931] Eastlake, D., "DNS Request and Transaction Signatures (SIG(0)s)", RFC 2931, September 2000. [RFC3110] Eastlake, D., "RSA/SHA-1 SIGs and RSA KEYs in the Domain Name System (DNS)", RFC 3110, May 2001. [RFC3658] Gudmundsson, O., "Delegation Signer (DS) Resource Record (RR)", RFC 3658, December 2003.
6.2. Informative References
[RFC2065] Eastlake, 3rd, D. and C. Kaufman, "Domain Name System Security Extensions", RFC 2065, January 1997. [RFC2671] Vixie, P., "Extension Mechanisms for DNS (EDNS0)", RFC 2671, August 1999. [RFC3225] Conrad, D., "Indicating Resolver Support of DNSSEC", RFC 3225, December 2001. [RFC3445] Massey, D., and S. Rose, "Limiting the Scope of the KEY Resource Record (RR)", RFC 3445, December 2002. [RFC3597] Gustafsson, A., "Handling of Unknown DNS Resource Record (RR) Types", RFC 3597, September 2003.
The changes introduced here and the analysis of alternatives had many contributors. With apologies to anyone overlooked, those include: Michael Graff, Johan Ihren, Olaf Kolkman, Mark Kosters, Ed Lewis, Bill Manning, Paul Vixie, and Suzanne Woolf.
Thanks to Jakob Schlyter and Mark Andrews for identifying the incompatibility described in section 1.2.
In addition to the above, the author would like to thank Scott Rose, Olafur Gudmundsson, and Sandra Murphy for their substantive comments.
8. Author's Address
7075 Samuel Morse Drive
Columbia, MD 21046
9. Full Copyright Statement
Copyright © The Internet Society (2004). This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at ietf- email@example.com.
Funding for the RFC Editor function is currently provided by the Internet Society.