Request for Comments: 8155
Category: Standards Track
Traversal Using Relays around NAT (TURN) Server Auto Discovery
Current Traversal Using Relays around NAT (TURN) server discovery mechanisms are relatively static and limited to explicit configuration. These are usually under the administrative control of the application or TURN service provider, and not the enterprise, ISP, or the network in which the client is located. Enterprises and ISPs wishing to provide their own TURN servers need auto-discovery mechanisms that a TURN client could use with minimal or no configuration. This document describes three such mechanisms for TURN server discovery.
This document updates RFC 5766 to relax the requirement for mutual authentication in certain cases.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at http://www.rfc-editor.org/info/rfc8155.
Copyright © 2017 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 3 3. Discovery Procedure . . . . . . . . . . . . . . . . . . . . . 4 4. Discovery Using Service Resolution . . . . . . . . . . . . . 5 4.1. Retrieving Domain Name . . . . . . . . . . . . . . . . . 5 4.1.1. DHCP . . . . . . . . . . . . . . . . . . . . . . . . 5 4.1.2. From Own Identity . . . . . . . . . . . . . . . . . . 6 4.2. Resolution . . . . . . . . . . . . . . . . . . . . . . . 6 5. DNS Service Discovery . . . . . . . . . . . . . . . . . . . . 6 5.1. mDNS . . . . . . . . . . . . . . . . . . . . . . . . . . 7 6. Discovery Using Anycast . . . . . . . . . . . . . . . . . . . 7 7. Deployment Considerations . . . . . . . . . . . . . . . . . . 8 7.1. Mobility and Changing IP Addresses . . . . . . . . . . . 8 7.2. Recursively Encapsulated TURN . . . . . . . . . . . . . . 8 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 9 8.1. IPv4 Anycast . . . . . . . . . . . . . . . . . . . . . . 9 8.2. IPv6 Anycast . . . . . . . . . . . . . . . . . . . . . . 9 9. Security Considerations . . . . . . . . . . . . . . . . . . . 10 9.1. Service Resolution . . . . . . . . . . . . . . . . . . . 12 9.2. DNS Service Discovery . . . . . . . . . . . . . . . . . . 12 9.3. Anycast . . . . . . . . . . . . . . . . . . . . . . . . . 13 10. References . . . . . . . . . . . . . . . . . . . . . . . . . 13 10.1. Normative References . . . . . . . . . . . . . . . . . . 13 10.2. Informative References . . . . . . . . . . . . . . . . . 15 Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 16 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 16
TURN [RFC5766] is a protocol that is often used to improve the connectivity of Peer-to-Peer (P2P) applications (as defined in Section 2.7 of [RFC5128]). TURN allows a connection to be established when one or both sides are incapable of a direct P2P connection. It is an important building block for interactive, real- time communication using audio, video, collaboration, etc.
While TURN services are extensively used today, the means to automatically discover TURN servers do not exist. TURN clients are usually explicitly configured with a well-known TURN server. To allow TURN applications to operate seamlessly across different types of networks and encourage the use of TURN without the need for manual configuration, it is important that there exist an auto-discovery mechanism for TURN services. Web Real-Time Communication (WebRTC) [WebRTC-Overview] usages and related extensions, which are mostly based on web applications, need TURN server discovery mechanisms.
This document describes three discovery mechanisms, so as to maximize the opportunity for discovery, based on the network in which the TURN client finds itself. The three discovery mechanisms are:
- A resolution mechanism based on Straightforward-Naming Authority Pointer (S-NAPTR) resource records in the Domain Name System (DNS). [RFC5928] describes details on retrieving a list of server transport addresses from the DNS that can be used to create a TURN allocation.
- DNS Service Discovery.
- A mechanism based on an anycast address for TURN.
In general, if a client wishes to communicate using one of its interfaces using a specific IP address family, it SHOULD query the TURN server(s) that has been discovered for that specific interface and address family. How to select an interface and IP address family is out of the scope of this document.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].
3. Discovery Procedure
A TURN client that implements the auto-discovery algorithm, to discover TURN servers in the attached network, uses the following mechanisms for discovery:
- Service Resolution: The TURN client attempts to perform TURN service resolution using the host's DNS domain.
- DNS SD: DNS Service Discovery.
- Anycast: Send TURN Allocation request to the assigned TURN anycast request for each combination of interface and address family.
Not all TURN servers may be discovered using NAPTR records or DNS SD. Similarly, not all TURN servers may support anycast. For best results, a client SHOULD implement all the discovery mechanisms described above.
The document does not prescribe a strict order that a client must follow for discovery. An implementation may choose to perform all the above steps in parallel for discovery OR choose to follow any desired order and stop the discovery procedure if a mechanism succeeds.
On hosts with more than one interface or address family (IPv4/v6), the TURN server discovery procedure has to be performed for each combination of interface and address family. A client MAY choose to perform the discovery procedure only for a desired interface/address combination if the client does not wish to discover a TURN server for all combinations of interface and address family.
4. Discovery Using Service Resolution
This mechanism is performed in two steps:
- A DNS domain name is retrieved for each combination of interface and address family.
- Retrieved DNS domain names are then used for S-NAPTR lookups as per [RFC5928]. Further DNS lookups may be necessary to determine TURN server IP address(es).
4.1. Retrieving Domain Name
A client has to determine the domain in which it is located. The following sections provide two possible mechanisms to learn the domain name, but other means of retrieving domain names may be used, which are outside the scope of this document, e.g., local configuration.
Implementations may allow the user to specify a default name that is used if no specific name has been configured.
DHCP can be used to determine the domain name related to an interface's point of network attachment. Network operators may provide the domain name to be used for service discovery within an access network using DHCP. Sections 3.2 and 3.3 of [RFC5986] define DHCP IPv4 and IPv6 access network domain name options, OPTION_V4_ACCESS_DOMAIN and OPTION_V6_ACCESS_DOMAIN respectively, to identify a domain name that is suitable for service discovery within the access network.
For IPv4, the discovery procedure MUST request the access network domain name option in a Parameter Request List option, as described in [RFC2131]. [RFC2132] defines the DHCP IPv4 domain name option; while this option is less suitable, a client MAY request it if the access network domain name defined in [RFC5986] is not available.
For IPv6, the discovery procedure MUST request the access network domain name option in an Options Request Option (ORO) within an Information-request message, as described in [RFC3315].
If neither option can be retrieved, the procedure fails for this interface. If a result can be retrieved, it will be used as an input for S-NAPTR resolution.
4.1.2. From Own Identity
For a TURN client with an understanding of the protocol mechanics of calling applications, the client may wish to extract the domain name from its own identity, i.e, the canonical identifier used to reach the user.
SIP : 'sip:email@example.com' Bare JID : 'firstname.lastname@example.org' email : 'email@example.com'
'example.com' is retrieved from the above examples.
A client may support multiple users, potentially with different domains, or a single user utilizing different domains for different services. The means to choose and extract the domain name may be different based on the type of identifier, service being used, etc., which are outside the scope of this document.
Once the TURN discovery procedure has retrieved domain names, the resolution mechanism described in [RFC5928] is followed. An S-NAPTR lookup with the 'RELAY' application service and the desired protocol tag is made to obtain the information necessary to connect to the authoritative TURN server within the given domain.
If no TURN-specific S-NAPTR records can be retrieved, the discovery procedure fails for this domain name (and the corresponding interface and IP protocol version). If more domain names are known, the discovery procedure may perform the corresponding S-NAPTR lookups immediately. However, before retrying a lookup that has failed, a client must wait a time period that is appropriate for the encountered error (NXDOMAIN, timeout, etc.).
5. DNS Service Discovery
DNS-based Service Discovery (DNS-SD) [RFC6763] and Multicast DNS (mDNS) [RFC6762] provide generic solutions for discovering services available in a local network. DNS-SD/mDNS define a set of naming rules for certain DNS record types that they use for advertising and discovering services.
Section 4.1 of [RFC6763] specifies that a service instance name in DNS-SD has the following structure:
<Instance> . <Service> . <Domain>
The <Domain> portion specifies the DNS sub-domain where the service instance is registered. It may be "local.", indicating the mDNS local domain, or it may be a conventional domain name such as "example.com.". The <Service> portion of the TURN service instance name MUST be "_turn._udp" or "_turn._tcp" or "_turns._udp" or "_turns._tcp", as introduced in [RFC5766].
A TURN client can proactively discover TURN servers being advertised in the site by multicasting a PTR query to one or all of the following:
A TURN server can send out gratuitous multicast DNS answer packets whenever it starts up, wakes from sleep, or detects a change in network configuration. TURN clients receive these gratuitous packets and cache information contained in it.
6. Discovery Using Anycast
IP anycast can also be used for TURN service discovery. A packet sent to an anycast address is delivered to the "topologically nearest" network interface with the anycast address. Using the TURN anycast address, the only two things that need to be deployed in the network for discovery are the two things that actually use TURN.
When a client requires TURN services, it sends a TURN Allocation request to the assigned anycast address. A TURN anycast server performs checks 1 through 7 discussed in Section 6.2 of [RFC5766]. If all checks pass, the TURN anycast server MUST respond with a 300 (Try Alternate) error as described in Section 2.9 of [RFC5766]; the response contains the TURN unicast address in the ALTERNATE-SERVER attribute. For subsequent communication with the TURN server, the client uses the responding server's unicast address. This has to be done because two packets addressed to an anycast address may reach two different anycast servers. The client, thus, also needs to ensure that the initial request fits in a single packet. An implementation may choose to send out every new TURN Allocation request to the anycast address to discover the closest and the most optimal unicast address for the TURN server.
7. Deployment Considerations
7.1. Mobility and Changing IP Addresses
A change of IP address on an interface may invalidate the result of the TURN server discovery procedure. For instance, if the IP address assigned to a mobile host changes due to host mobility, it may be required to re-run the TURN server discovery procedure without relying on earlier gained information. New requests should be made to the newly learned TURN servers that were learned after TURN the discovery was re-run. However, if an earlier learned TURN server is still accessible using the new IP address, procedures described for mobility using TURN defined in [RFC8016] can be used for ongoing streams.
7.2. Recursively Encapsulated TURN
WebRTC endpoints SHOULD treat any TURN server discovered through the mechanisms described in this specification as an enterprise/gateway or access network server, in accordance with Recursively Encapsulated TURN [RETURN].
8. IANA Considerations
8.1. IPv4 Anycast
IANA has assigned a single IPv4 address from the 192.0.0.0/24 prefix and registered it in the "IANA IPv4 Special-Purpose Address Registry" [RFC6890].
+----------------------+-------------------------------------------+ | Attribute | Value | +----------------------+-------------------------------------------+ | Address Block | 188.8.131.52/32 | | Name | Traversal Using Relays around NAT Anycast | | RFC | RFC 8155 | | Allocation Date | 2017-02 | | Termination Date | N/A | | Source | True | | Destination | True | | Forwardable | True | | Global | True | | Reserved-by-Protocol | False | +----------------------+-------------------------------------------+
8.2. IPv6 Anycast
IANA has assigned a single IPv6 address from the 2001:0000::/23 prefix and registered it in the "IANA IPv6 Special-Purpose Address Registry" [RFC6890].
+----------------------+-------------------------------------------+ | Attribute | Value | +----------------------+-------------------------------------------+ | Address Block | 2001:1::2/128 | | Name | Traversal Using Relays around NAT Anycast | | RFC | RFC 8155 | | Allocation Date | 2017-02 | | Termination Date | N/A | | Source | True | | Destination | True | | Forwardable | True | | Global | True | | Reserved-by-Protocol | False | +----------------------+-------------------------------------------+
9. Security Considerations
Use of Session Traversal Utilities for NAT (STUN) [RFC5389] authentication is OPTIONAL for TURN servers provided by the local network or by the access network. A network-provided TURN server MAY be configured to accept Allocation requests without STUN authentication, and a TURN client MAY be configured to accept Allocation success responses without STUN authentication from a network-provided TURN server.
Making STUN authentication optional is a downgrade of a MUST level requirement defined in [RFC5766]. The downgrade allows TURN servers provided by the local or access network to accept Allocation requests from new and/or guest users in the network who do not necessarily possess long term credentials for STUN authentication. The intention in such deployments is to provide TURN services to all users in the local or access network. However, this opens up a TURN server to a variety of attacks described in Section 17 of [RFC5766]. A TURN server in such cases must be configured to only process STUN requests from the trusted local network or subscribers of the access network. Operational measures must be taken in order to protect the TURN server; some of these measures include, but are not limited to, access control by means of access lists, firewalls, subscriber quota limits, ingress filtering, etc.
A TURN client in the absence of the STUN long-term credential mechanism [RFC5389] or the STUN Extension for Third-Party Authorization [RFC7635] MUST use (D)TLS unless it trusts the network infrastructure to defend against attacks discussed in [RFC5766]. It is RECOMMENDED that the TURN client use one of the following techniques with (D)TLS to validate the TURN server:
- For certificate-based authentication, a pre-populated trust anchor store [RFC6024] allows a TURN client to perform path validation for the server certificate obtained during the (D)TLS handshake. If the client used a domain name to discover the TURN server, that domain name also provides a mechanism for validation of the TURN server. The client MUST use the rules and guidelines given in Section 6 of [RFC6125] to validate the TURN server identity.
- Certification authorities that issue TURN server certificates SHOULD support the CN-ID, DNS-ID, SRV-ID, and URI-ID identifier types. TURN service providers SHOULD prefer the use of DNS-ID, SRV-ID, and URI-ID over CN-ID identifier types in certificate requests (as described in Section 2.3 from [RFC6125]) and the wildcard character '*' SHOULD NOT be included in the presented identifier.
- For TURN servers that don't have a certificate trust chain (e.g., because they are on a home network or a corporate network), a configured list of TURN servers can contain the Subject Public Key Info (SPKI) fingerprint of the TURN servers. The public key is used for the same reasons HTTP pinning [RFC7469] uses the public key.
- Raw public key-based authentication, as defined in [RFC7250], could also be used to authenticate a TURN server.
An auto-discovered TURN server is considered to be only as trusted as the path between the client and the TURN server. In order to safely use auto-discovered TURN servers for sessions with 'strict privacy' requirements, the user needs to be able to define privacy criteria (e.g., a trusted list of servers, networks, or domains) that are considered acceptable for such traffic. Any discovered TURN server outside the criteria is considered untrusted and therefore MUST NOT be used for privacy-sensitive communication.
In some auto-discovery scenarios, it might not be possible for the TURN client to use (D)TLS authentication to validate the TURN server. However, fallback to clear text in such cases could leave the TURN client open to on-path injection of spoofed TURN messages. A TURN client could fall back to encryption-only (D)TLS when (D)TLS authentication is not available but MUST NOT fall back without explicit administrator choice. Another reason to fall back to encryption-only is for privacy, which is analogous to SMTP opportunistic encryption [RFC7435] where one does not require privacy but one desires privacy when possible.
In order to allow the TURN client to fall back to (D)TLS as described above, a TURN server that does not require either STUN long-term authentication [RFC5389] or STUN Extension for Third Party Authorization [RFC7635] MUST support (D)TLS and, if the network infrastructure is capable of defending against attacks discussed in [RFC5766], then the TURN server MAY allow fallback to clear text.
A TURN client could fall back to clear text if it does not support unauthenticated (D)TLS but MUST NOT fall back without explicit administrator choice. Fallback to clear text is NOT RECOMMENDED because it makes the client more susceptible to man-in-the-middle attacks and on-path packet injection.
9.1. Service Resolution
The primary attack against the methods described in this document is one that would lead to impersonation of a TURN server. An attacker could attempt to compromise the S-NAPTR resolution. Security considerations described in [RFC5928] are applicable here as well.
In addition to considerations related to S-NAPTR, it is important to recognize that the output of this is entirely dependent on its input. An attacker who can control the domain name can also control the final result. Because more than one method can be used to determine the domain name, a host implementation needs to consider attacks against each of the methods that are used.
If DHCP is used, the integrity of DHCP options is limited by the security of the channel over which they are provided. Physical security and separation of DHCP messages from other packets are commonplace methods that can reduce the possibility of attack within an access network; alternatively, DHCP authentication [RFC3188] can provide a degree of protection against modification. When using DHCP discovery, clients are encouraged to use unicast DHCP INFORM queries instead of broadcast queries, which are more easily spoofed in insecure networks.
9.2. DNS Service Discovery
Since DNS-SD is just a specification for how to name and use records in the existing DNS system, it has no specific additional security requirements over and above those that already apply to DNS queries and DNS updates. For DNS queries, DNS Security Extensions (DNSSEC) [RFC4033] should be used where the authenticity of information is important. For DNS updates, secure updates [RFC2136] [RFC3007] should generally be used to control which clients have permission to update DNS records.
For mDNS, in addition to what has been described above, a principal security threat is a security threat inherent to IP multicast routing and any application that runs on it. A rogue system can advertise that it is a TURN server. Discovery of such rogue systems as TURN servers, in itself, is not a security threat if there is a means for the TURN client to authenticate and authorize the discovered TURN servers.
In a network without any TURN server that is aware of the TURN anycast address, outgoing TURN requests could leak out onto the external Internet, possibly revealing information.
Using an IANA-assigned well-known TURN anycast address enables border gateways to block such outgoing packets. In the default-free zone, routers should be configured to drop such packets. Such configuration can occur naturally via BGP messages advertising that no route exists to said address.
Sensitive clients that do not wish to leak information about their presence can set an IP TTL on their TURN requests that limits how far they can travel into the public Internet.
10.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/RFC2119, March 1997, <http://www.rfc-editor.org/info/rfc2119>. [RFC2131] Droms, R., "Dynamic Host Configuration Protocol", RFC 2131, DOI 10.17487/RFC2131, March 1997, <http://www.rfc-editor.org/info/rfc2131>. [RFC2132] Alexander, S. and R. Droms, "DHCP Options and BOOTP Vendor Extensions", RFC 2132, DOI 10.17487/RFC2132, March 1997, <http://www.rfc-editor.org/info/rfc2132>. [RFC2136] Vixie, P., Ed., Thomson, S., Rekhter, Y., and J. Bound, "Dynamic Updates in the Domain Name System (DNS UPDATE)", RFC 2136, DOI 10.17487/RFC2136, April 1997, <http://www.rfc-editor.org/info/rfc2136>. [RFC3007] Wellington, B., "Secure Domain Name System (DNS) Dynamic Update", RFC 3007, DOI 10.17487/RFC3007, November 2000, <http://www.rfc-editor.org/info/rfc3007>. [RFC3315] Droms, R., Ed., Bound, J., Volz, B., Lemon, T., Perkins, C., and M. Carney, "Dynamic Host Configuration Protocol for IPv6 (DHCPv6)", RFC 3315, DOI 10.17487/RFC3315, July 2003, <http://www.rfc-editor.org/info/rfc3315>. [RFC4033] Arends, R., Austein, R., Larson, M., Massey, D., and S. Rose, "DNS Security Introduction and Requirements", RFC 4033, DOI 10.17487/RFC4033, March 2005, <http://www.rfc-editor.org/info/rfc4033>. [RFC5389] Rosenberg, J., Mahy, R., Matthews, P., and D. Wing, "Session Traversal Utilities for NAT (STUN)", RFC 5389, DOI 10.17487/RFC5389, October 2008, <http://www.rfc-editor.org/info/rfc5389>. [RFC5766] Mahy, R., Matthews, P., and J. Rosenberg, "Traversal Using Relays around NAT (TURN): Relay Extensions to Session Traversal Utilities for NAT (STUN)", RFC 5766, DOI 10.17487/RFC5766, April 2010, <http://www.rfc-editor.org/info/rfc5766>. [RFC5928] Petit-Huguenin, M., "Traversal Using Relays around NAT (TURN) Resolution Mechanism", RFC 5928, DOI 10.17487/RFC5928, August 2010, <http://www.rfc-editor.org/info/rfc5928>. [RFC5986] Thomson, M. and J. Winterbottom, "Discovering the Local Location Information Server (LIS)", RFC 5986, DOI 10.17487/RFC5986, September 2010, <http://www.rfc-editor.org/info/rfc5986>. [RFC6024] Reddy, R. and C. Wallace, "Trust Anchor Management Requirements", RFC 6024, DOI 10.17487/RFC6024, October 2010, <http://www.rfc-editor.org/info/rfc6024>. [RFC6762] Cheshire, S. and M. Krochmal, "Multicast DNS", RFC 6762, DOI 10.17487/RFC6762, February 2013, <http://www.rfc-editor.org/info/rfc6762>. [RFC6763] Cheshire, S. and M. Krochmal, "DNS-Based Service Discovery", RFC 6763, DOI 10.17487/RFC6763, February 2013, <http://www.rfc-editor.org/info/rfc6763>. [RFC6890] Cotton, M., Vegoda, L., Bonica, R., Ed., and B. Haberman, "Special-Purpose IP Address Registries", BCP 153, RFC 6890, DOI 10.17487/RFC6890, April 2013, <http://www.rfc-editor.org/info/rfc6890>. [RFC7250] Wouters, P., Ed., Tschofenig, H., Ed., Gilmore, J., Weiler, S., and T. Kivinen, "Using Raw Public Keys in Transport Layer Security (TLS) and Datagram Transport Layer Security (DTLS)", RFC 7250, DOI 10.17487/RFC7250, June 2014, <http://www.rfc-editor.org/info/rfc7250>. [RFC7635] Reddy, T., Patil, P., Ravindranath, R., and J. Uberti, "Session Traversal Utilities for NAT (STUN) Extension for Third-Party Authorization", RFC 7635, DOI 10.17487/RFC7635, August 2015, <http://www.rfc-editor.org/info/rfc7635>.
10.2. Informative References
[RETURN] Schwartz, B. and J. Uberti, "Recursively Encapsulated TURN (RETURN) for Connectivity and Privacy in WebRTC", Work in Progress, draft-ietf-rtcweb-return-02, March 2017. [RFC3188] Hakala, J., "Using National Bibliography Numbers as Uniform Resource Names", RFC 3188, DOI 10.17487/RFC3188, October 2001, <http://www.rfc-editor.org/info/rfc3188>. [RFC5128] Srisuresh, P., Ford, B., and D. Kegel, "State of Peer-to- Peer (P2P) Communication across Network Address Translators (NATs)", RFC 5128, DOI 10.17487/RFC5128, March 2008, <http://www.rfc-editor.org/info/rfc5128>. [RFC6125] Saint-Andre, P. and J. Hodges, "Representation and Verification of Domain-Based Application Service Identity within Internet Public Key Infrastructure Using X.509 (PKIX) Certificates in the Context of Transport Layer Security (TLS)", RFC 6125, DOI 10.17487/RFC6125, March 2011, <http://www.rfc-editor.org/info/rfc6125>. [RFC7435] Dukhovni, V., "Opportunistic Security: Some Protection Most of the Time", RFC 7435, DOI 10.17487/RFC7435, December 2014, <http://www.rfc-editor.org/info/rfc7435>. [RFC7469] Evans, C., Palmer, C., and R. Sleevi, "Public Key Pinning Extension for HTTP", RFC 7469, DOI 10.17487/RFC7469, April 2015, <http://www.rfc-editor.org/info/rfc7469>. [RFC8016] Reddy, T., Wing, D., Patil, P., and P. Martinsen, "Mobility with Traversal Using Relays around NAT (TURN)", RFC 8016, DOI 10.17487/RFC8016, November 2016, <http://www.rfc-editor.org/info/rfc8016>.
Alvestrand, H., "Overview: Real Time Protocols for
Browser-based Applications", Work in Progress,
draft-ietf-rtcweb-overview-18, March 2017.
The authors would like to thank Simon Perrault, Paul Kyzivat, Troy Shields, Eduardo Gueiros, Ted Hardie, Bernard Aboba, Karl Stahl, Brian Weis, Ralph Dromes, Ben Campbell, Suresh Krishnan, and Brandon Williams for their review and valuable comments. Thanks to Adam Roach for his detailed review and suggesting DNS Service Discovery as an additional discovery mechanism.
Cisco Systems, Inc.
firstname.lastname@example.org Tirumaleswar Reddy Cisco Systems, Inc. Cessna Business Park, Varthur Hobli Sarjapur Marathalli Outer Ring Road Bangalore, Karnataka 560103 India
United States America