Novell, Inc.
April 1995
TCP/IPX Connection Mib Specification
Status of this Memo
-
This document defines an Experimental Protocol for the Internet community. This does not specify an Internet standard of any kind. Discussion and suggestions for improvement are requested. Distribution of this memo is unlimited.
IESG Note:
-
Internet Engineering Steering Group comment from the Area Director for Transport Services: Please note well that this memo is an individual product of the author. Implementation experience, particularly on the effectiveness of the protocols in dual-stack environments, is needed.
1. Introduction
-
Traditionally, TCP and UDP runs over IP. STD 17, RFC 1213 defines TCP connection MIB object and UDP listener object assuming just that. For TCP and UDP running over IPX, tcpConnTable and udpTable objects from RFC 1213 cannot be used since they define the address to be of type IpAddress. As such, we need to define new objects that can properly describe TCP and UDP connections over IPX.
New MIB objects, tcpIpxConnTable, udpIpxTable, tcpUnspecConnTable and udpUnspecTable are presented in this paper, to be used in place of tcpConnTable and udpListenerTable when TCP and UDP are running over IPX.
2. Objects
-
-
-
TCPIPX-MIB DEFINITIONS ::= BEGIN
IMPORTS
-
-
OBJECT-TYPE
-
-
-
FROM RFC-1212;
-
-
-- IPX address type.
-- First 4 octests are the network numbers and the last 6 -- octests are the node numbers. In ascii, it is represented
-- as hex digits, as in: nnnnnnnn:mmmmmmmmmmmm IpxAddress ::= OCTET STRING (size (10)) -- TCP/IPX MIB object idenfifiers novell OBJECT IDENTIFIER ::= { enterprises 23 } mibDoc OBJECT IDENTIFIER ::= { novell 2 } tcpx OBJECT IDENTIFIER ::= { mibDoc 29 } tcpxTcp OBJECT IDENTIFIER ::= { tcpx 1 } tcpxUdp OBJECT IDENTIFIER ::= { tcpx 2 } -- the TCP/IPX Connection table
-
-- The TCP/IPX connection table contains information
-- about this entity's existing TCP connections over
-- IPX.
-
-
-
tcpIpxConnTable OBJECT-TYPE
-
SYNTAX SEQUENCE OF TcpIpxConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing information specific on TCP connection over IPX network layer." ::= { tcpxTcp 1 }
-
-
tcpIpxConnEntry OBJECT-TYPE
-
SYNTAX TcpIpxConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular current TCP connection over IPX An object of this type is transient, in that it ceases to exist when (or soon after) the connection makes the transition to the CLOSED state." INDEX { tcpIpxConnLocalAddress, tcpIpxConnLocalPort, tcpIpxConnRemAddress, tcpIpxConnRemPort } ::= { tcpIpxConnTable 1 }
-
-
TcpIpxConnEntry ::=
-
SEQUENCE { tcpIpxConnState INTEGER, tcpIpxConnLocalAddress IpxAddress tcpIpxConnLocalPort INTEGER (0..65535), tcpIpxConnRemAddress IpxAddress, tcpIpxConnRemPort INTEGER (0..65535) }
-
-
tcpIpxConnState OBJECT-TYPE
-
SYNTAX INTEGER { closed(1), listen(2), synSent(3), synReceived(4), established(5), finWait1(6), finWait2(7), closeWait(8), lastAck(9), closing(10), timeWait(11), deleteTCB(12) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of this TCP connection.
-
-
-
-
-
The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value.
If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection.
As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST
-
-
-
-
segments are not sent reliably)." ::= { tcpIpxConnEntry 1 }
-
-
tcpIpxConnLocalAddress OBJECT-TYPE
-
SYNTAX IpxAddress ACCESS read-only STATUS mandatory DESCRIPTION "The local IPX address for this TCP connection. In the case of a connection in the listen state which is willing to accept connections for any interface, the value 00000000:000000000000 is used. See tcpUnspecConnTable for connections in the listen state which is willing to accept connects for any IP interface associated with the node." ::= { tcpIpxConnEntry 2 }
-
-
-- NetworkAddress defined in SMI only include IP currently, -- so we can't use it to represent both IP and IPX address.
tcpIpxConnLocalPort OBJECT-TYPE
-
SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The local port number for this TCP connection." ::= { tcpIpxConnEntry 3 }
-
-
tcpIpxConnRemAddress OBJECT-TYPE
-
SYNTAX IpxAddress ACCESS read-only STATUS mandatory DESCRIPTION "The remote IPX address for this TCP connection." ::= { tcpIpxConnEntry 4 }
-
-
tcpIpxConnRemPort OBJECT-TYPE
-
SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The remote port number for this TCP connection." ::= { tcpIpxConnEntry 5 } -- the UDP Listener table
-
-
-- The UDP listener table contains information about this -- entity's UDP end-points on which a local application is -- currently accepting datagrams.
udpIpxTable OBJECT-TYPE
-
SYNTAX SEQUENCE OF UdpIpxEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing UDP listener information." ::= { tcpxUdp 1 }
-
-
udpIpxEntry OBJECT-TYPE
-
SYNTAX UdpIpxEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular current UDP listener." INDEX { udpIpxLocalAddress, udpIpxLocalPort } ::= { udpIpxTable 1 }
-
-
UdpIpxEntry ::=
-
SEQUENCE { udpIpxLocalAddress IpxAddress udpIpxLocalPort INTEGER (0..65535) }
-
-
udpIpxLocalAddress OBJECT-TYPE
-
SYNTAX IpxAddress ACCESS read-only STATUS mandatory DESCRIPTION "The local IPX address for this UDP listener. In the case of a UDP listener which is willing to accept datagrams for any interface, the value 00000000:000000000000 is used. See udpUnspecTable for UDP listener which is willing to accept datagrams from any network layer." ::= { udpIpxEntry 1 }
-
-
udpIpxLocalPort OBJECT-TYPE
-
SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The local port number for this UDP listener." ::= { udpIpxEntry 2 } -- the TCP/UNSPEC Connection table
-
-
-- The TCP/UPSPEC connection table contains information -- about this entity's existing TCP connections over -- unspecified network.
-- Since the network is unspecified, the network -- address is also unspecified. Hence, this -- connection table does not include any network -- address.tcpUnspecConnTable OBJECT-TYPE
-
SYNTAX SEQUENCE OF TcpIpxConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing information specific on TCP connection over unspecified network layer." ::= { tcpxTcp 2 }
-
-
tcpUnspecConnEntry OBJECT-TYPE
-
SYNTAX TcpUnspecConnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular current TCP connection over unspecified network layer. An object of this type is transient, in that it ceases to exist when the connection makes transition beyond LISTEN state, or when (or soon after) the connection makes transition to the CLOSED state," INDEX { tcpUnspecConnLocalPort } ::= { tcpUnspecConnTable 1 }
-
-
TcpUnspecConnEntry ::=
-
SEQUENCE {
-
tcpUnspecConnState INTEGER, tcpUnspecConnLocalPort INTEGER (0..65535), }
-
-
tcpUnspecConnState OBJECT-TYPE
-
SYNTAX INTEGER { closed(1), listen(2), deleteTCB(12) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of this TCP connection.
-
-
-
-
-
Since the TCP connection can belong to this table only when its state is less than SYN_SENT, only closed and listen state apply.
The only value which may be set by a management station is deleteTCB(12). Accordingly, it is appropriate for an agent to return a `badValue' response if a management station attempts to set this object to any other value.
If a management station sets this object to the value deleteTCB(12), then this has the effect of deleting the TCB (as defined in RFC 793) of the corresponding connection on the managed node, resulting in immediate termination of the connection.
-
-
-
-
As an implementation-specific option, a RST segment may be sent from the managed node to the other TCP endpoint (note however that RST segments are not sent reliably)." ::= { tcpUnspecConnEntry 1 }
-
-
tcpUnspecConnLocalPort OBJECT-TYPE
-
SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The local port number for this TCP connection." ::= { tcpUnspecConnEntry 2 } -- the UDP Listener table
-
-
-- The UDP listener table contains information about this -- entity's UDP end-points over unspecified network layer, -- on which a local application is currently accepting -- datagrams. If network layer is unspecified, the network -- address is also unspecified. Hence, this table does not -- include any network address.
udpUnspecTable OBJECT-TYPE
-
SYNTAX SEQUENCE OF UdpUnspecEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table containing UDP listener information." ::= { tcpxUdp 2 }
-
-
udpUnspecEntry OBJECT-TYPE
-
SYNTAX UdpUnspecEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information about a particular current UDP listener." INDEX { udpUnspecLocalPort } ::= { udpUnspecTable 1 }
-
-
UdpUnspecEntry ::=
-
SEQUENCE { udpUnspecLocalPort INTEGER (0..65535) }
-
-
udpUnspecLocalPort OBJECT-TYPE
-
SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The local port number for this UDP listener." ::= { udpUnspecEntry 1 } END
-
Acknowledgement
-
The author would like to thank following folks and others for their assitance: Greg Minshall, Dave Piscitello.
Security Considerations
-
Security issues are not discussed in this memo.
Author's Address
-
Tae Sung
Novell, Inc.
2180 Fortune Drive
San Jose, California, 95131Phone: (408)577-8439 EMail: tae@novell.Com