Internet Research Task Force (IRTF)                              J. Hong
Request for Comments: 9556                                          ETRI
Category: Informational                                        Y-G. Hong
ISSN: 2070-1721                                       Daejeon University
                                                               X. de Foy
                                        InterDigital Communications, LLC
                                                             M. Kovatsch
                                    Huawei Technologies Duesseldorf GmbH
                                                             E. Schooler
                                                    University of Oxford
                                                             D. Kutscher
                                                               HKUST(GZ)
                                                              April 2024

Internet of Things (IoT) Edge Challenges and Functions

Abstract

Many Internet of Things (IoT) applications have requirements that cannot be satisfied by centralized cloud-based systems (i.e., cloud computing). These include time sensitivity, data volume, connectivity cost, operation in the face of intermittent services, privacy, and security. As a result, IoT is driving the Internet toward edge computing. This document outlines the requirements of the emerging IoT edge and its challenges. It presents a general model and major components of the IoT edge to provide a common basis for future discussions in the Thing-to-Thing Research Group (T2TRG) and other IRTF and IETF groups. This document is a product of the IRTF T2TRG.

Status of This Memo

This document is not an Internet Standards Track specification; it is published for informational purposes.

This document is a product of the Internet Research Task Force (IRTF). The IRTF publishes the results of Internet-related research and development activities. These results might not be suitable for deployment. This RFC represents the consensus of the Thing-to-Thing Research Group of the Internet Research Task Force (IRTF). Documents approved for publication by the IRSG are not candidates for any level of Internet Standard; see Section 2 of RFC 7841.

Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc9556.

Copyright Notice

Copyright © 2024 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document.

Table of Contents

   1.  Introduction
   2.  Background
     2.1.  Internet of Things (IoT)
     2.2.  Cloud Computing
     2.3.  Edge Computing
     2.4.  Examples of IoT Edge Computing Use Cases
   3.  IoT Challenges Leading toward Edge Computing
     3.1.  Time Sensitivity
     3.2.  Connectivity Cost
     3.3.  Resilience to Intermittent Services
     3.4.  Privacy and Security
   4.  IoT Edge Computing Functions
     4.1.  Overview of IoT Edge Computing
     4.2.  General Model
     4.3.  OAM Components
       4.3.1.  Resource Discovery and Authentication
       4.3.2.  Edge Organization and Federation
       4.3.3.  Multi-Tenancy and Isolation
     4.4.  Functional Components
       4.4.1.  In-Network Computation
       4.4.2.  Edge Storage and Caching
       4.4.3.  Communication
     4.5.  Application Components
       4.5.1.  IoT Device Management
       4.5.2.  Data Management and Analytics
     4.6.  Simulation and Emulation Environments
   5.  Security Considerations
   6.  Conclusion
   7.  IANA Considerations
   8.  Informative References
   Acknowledgements
   Authors' Addresses

1. Introduction

At the time of writing, many IoT services leverage cloud computing platforms because they provide virtually unlimited storage and processing power. The reliance of IoT on back-end cloud computing provides additional advantages, such as scalability and efficiency. At the time of writing, IoT systems are fairly static with respect to integrating and supporting computation. It is not that there is no computation, but that systems are often limited to static configurations (edge gateways and cloud services).

However, IoT devices generate large amounts of data at the edges of the network. To meet IoT use case requirements, data is increasingly being stored, processed, analyzed, and acted upon close to the data sources. These requirements include time sensitivity, data volume, connectivity cost, and resiliency in the presence of intermittent connectivity, privacy, and security, which cannot be addressed by centralized cloud computing. A more flexible approach is necessary to address these needs effectively. This involves distributing computing (and storage) and seamlessly integrating it into the edge- cloud continuum. We refer to this integration of edge computing and IoT as "IoT edge computing". This document describes the related background, use cases, challenges, system models, and functional components.

Owing to the dynamic nature of the IoT edge computing landscape, this document does not list existing projects in this field. Section 4.1 presents a high-level overview of the field based on a limited review of standards, research, and open-source and proprietary products in [EDGE-COMPUTING-BACKGROUND].

This document represents the consensus of the Thing-to-Thing Research Group (T2TRG). It has been reviewed extensively by the research group members who are actively involved in the research and development of the technology covered by this document. It is not an IETF product and is not a standard.

2. Background

2.1. Internet of Things (IoT)

Since the term "Internet of Things" was coined by Kevin Ashton in 1999 while working on Radio-Frequency Identification (RFID) technology [Ashton], the concept of IoT has evolved. At the time of writing, it reflects a vision of connecting the physical world to the virtual world of computers using (often wireless) networks over which things can send and receive information without human intervention. Recently, the term has become more literal by connecting things to the Internet and converging on Internet and web technologies.

A "Thing" is a physical item made available in the IoT, thereby enabling digital interaction with the physical world for humans, services, and/or other Things [REST-IOT]. In this document, we will use the term "IoT device" to designate the embedded system attached to the Thing.

Resource-constrained Things, such as sensors, home appliances, and wearable devices, often have limited storage and processing power, which can create challenges with respect to reliability, performance, energy consumption, security, and privacy [Lin]. Some, less- resource-constrained Things, can generate a voluminous amount of data. This range of factors led to IoT designs that integrate Things into larger distributed systems, for example, edge or cloud computing systems.

2.2. Cloud Computing

Cloud computing has been defined in [NIST]:

   |  Cloud computing is a model for enabling ubiquitous, convenient,
   |  on-demand network access to a shared pool of configurable
   |  computing resources (e.g., networks, servers, storage,
   |  applications, and services) that can be rapidly provisioned and
   |  released with minimal management effort or service provider
   |  interaction.

The low cost and massive availability of storage and processing power enabled the realization of another computing model in which virtualized resources can be leased in an on-demand fashion and provided as general utilities. Platform-as-a-Service (PaaS) and cloud computing platforms widely adopted this paradigm for delivering services over the Internet, gaining both economical and technical benefits [Botta].

At the time of writing, an unprecedented volume and variety of data is generated by Things, and applications deployed at the network edge consume this data. In this context, cloud-based service models are not suitable for some classes of applications that require very short response times, require access to local personal data, or generate vast amounts of data. These applications may instead leverage edge computing.

2.3. Edge Computing

Edge computing, also referred to as "fog computing" in some settings, is a new paradigm in which substantial computing and storage resources are placed at the edge of the Internet, close to mobile devices, sensors, actuators, or machines. Edge computing happens near data sources [Mahadev] as well as close to where decisions are made or where interactions with the physical world take place ("close" here can refer to a distance that is topological, physical, latency-based, etc.). It processes both downstream data (originating from cloud services) and upstream data (originating from end devices or network elements). The term "fog computing" usually represents the notion of multi-tiered edge computing, that is, several layers of compute infrastructure between end devices and cloud services.

An edge device is any computing or networking resource residing between end-device data sources and cloud-based data centers. In edge computing, end devices consume and produce data. At the network edge, devices not only request services and information from the cloud but also handle computing tasks including processing, storing, caching, and load balancing on data sent to and from the cloud [Shi]. This does not preclude end devices from hosting computation themselves, when possible, independently or as part of a distributed edge computing platform.

Several Standards Developing Organizations (SDOs) and industry forums have provided definitions of edge and fog computing:

  • ISO defines edge computing as a "form of distributed computing in which significant processing and data storage takes place on nodes which are at the edge of the network" [ISO_TR].
  • ETSI defines multi-access edge computing as a "system which provides an IT service environment and cloud-computing capabilities at the edge of an access network which contains one or more type of access technology, and in close proximity to its users" [ETSI_MEC_01].
  • The Industry IoT Consortium (IIC) (now incorporating what was formerly OpenFog) defines fog computing as "a horizontal, system- level architecture that distributes computing, storage, control and networking functions closer to the users along a cloud-to- thing continuum" [OpenFog].

Based on these definitions, we can summarize a general philosophy of edge computing as distributing the required functions close to users and data, while the difference to classic local systems is the usage of management and orchestration features adopted from cloud computing.

Actors from various industries approach edge computing using different terms and reference models, although, in practice, these approaches are not incompatible and may integrate with each other:

  • The telecommunication industry tends to use a model where edge computing services are deployed over a Network Function Virtualization (NFV) infrastructure, at aggregation points, or in proximity to the user equipment (e.g., gNodeBs) [ETSI_MEC_03].
  • Enterprise and campus solutions often interpret edge computing as an "edge cloud", that is, a smaller data center directly connected to the local network (often referred to as "on-premise").
  • The automation industry defines the edge as the connection point between IT and Operational Technology (OT). Hence, edge computing sometimes refers to applying IT solutions to OT problems, such as analytics, more-flexible user interfaces, or simply having more computing power than an automation controller.

2.4. Examples of IoT Edge Computing Use Cases

IoT edge computing can be used in home, industry, grid, healthcare, city, transportation, agriculture, and/or educational scenarios. Here, we discuss only a few examples of such use cases to identify differentiating requirements, providing references to other use cases.

*Smart Factory*

As part of the Fourth Industrial Revolution, smart factories run real-time processes based on IT technologies, such as artificial intelligence and big data. Even a very small environmental change in a smart factory can lead to a situation in which production efficiency decreases or product quality problems occur. Therefore, simple but time-sensitive processing can be performed at the edge, for example, controlling the temperature and humidity in the factory or operating machines based on the real-time collection of the operational status of each machine. However, data requiring highly precise analysis, such as machine life-cycle management or accident risk prediction, can be transferred to a central data center for processing.

The use of edge computing in a smart factory [Argungu] can reduce the cost of network and storage resources by reducing the communication load to the central data center or server. It is also possible to improve process efficiency and facility asset productivity through real-time prediction of failures and to reduce the cost of failure through preliminary measures. In the existing manufacturing field, production facilities are manually run according to a program entered in advance; however, edge computing in a smart factory enables tailoring solutions by analyzing data at each production facility and machine level. Digital twins [Jones] of IoT devices have been jointly used with edge computing in industrial IoT scenarios [Chen].

*Smart Grid*

In future smart-city scenarios, the smart grid will be critical in ensuring highly available and efficient energy control in city- wide electricity management [Mehmood]. Edge computing is expected to play a significant role in these systems to improve the transmission efficiency of electricity, to react to and restore power after a disturbance, to reduce operation costs, and to reuse energy effectively since these operations involve local decision- making. In addition, edge computing can help monitor power generation and power demand and make local electrical energy storage decisions in smart grid systems.

*Smart Agriculture*

Smart agriculture integrates information and communication technologies with farming technology. Intelligent farms use IoT technology to measure and analyze parameters, such as the temperature, humidity, sunlight, carbon dioxide, and soil quality, in crop cultivation facilities. Depending on the analysis results, control devices are used to set the environmental parameters to an appropriate state. Remote management is also possible through mobile devices, such as smartphones.

In existing farms, simple systems, such as management according to temperature and humidity, can be easily and inexpensively implemented using IoT technology [Tanveer]. Field sensors gather data on field and crop condition. This data is then transmitted to cloud servers that process data and recommend actions. The use of edge computing can reduce the volume of back-and-forth data transmissions significantly, resulting in cost and bandwidth savings. Locally generated data can be processed at the edge, and local computing and analytics can drive local actions. With edge computing, it is easy for farmers to select large amounts of data for processing, and data can be analyzed even in remote areas with poor access conditions. Other applications include enabling dashboarding, for example, to visualize the farm status, as well as enhancing Extended Reality (XR) applications that require edge audio and/or video processing. As the number of people working on farming has been decreasing over time, increasing automation enabled by edge computing can be a driving force for future smart agriculture [OGrady].

*Smart Construction*

Safety is critical at construction sites. Every year, many construction workers lose their lives because of falls, collisions, electric shocks, and other accidents [BigRentz]. Therefore, solutions have been developed to improve construction site safety, including the real-time identification of workers, monitoring of equipment location, and predictive accident prevention. To deploy these solutions, many cameras and IoT sensors have been installed on construction sites to measure noise, vibration, gas concentration, etc. Typically, the data generated from these measurements is collected in on-site gateways and sent to remote cloud servers for storage and analysis. Thus, an inspector can check the information stored on the cloud server to investigate an incident. However, this approach can be expensive because of transmission costs (for example, of video streams over a mobile network connection) and because usage fees of private cloud services.

Using edge computing [Yue], data generated at the construction site can be processed and analyzed on an edge server located within or near the site. Only the result of this processing needs to be transferred to a cloud server, thus reducing transmission costs. It is also possible to locally generate warnings to prevent accidents in real time.

*Self-Driving Car*

Edge computing plays a crucial role in safety-focused self-driving car systems [Badjie]. With a multitude of sensors, such as high- resolution cameras, radars, Light Detection and Ranging (LiDAR) systems, sonar sensors, and GPS systems, autonomous vehicles generate vast amounts of real-time data. Local processing utilizing edge computing nodes allows for efficient collection and analysis of this data to monitor vehicle distances and road conditions and respond promptly to unexpected situations. Roadside computing nodes can also be leveraged to offload tasks when necessary, for example, when the local processing capacity of the car is insufficient because of hardware constraints or a large data volume.

For instance, when the car ahead slows, a self-driving car adjusts its speed to maintain a safe distance, or when a roadside signal changes, it adapts its behavior accordingly. In another example, cars equipped with self-parking features utilize local processing to analyze sensor data, determine suitable parking spots, and execute precise parking maneuvers without relying on external processing or connectivity. It is also possible to use in-cabin cameras coupled with local processing to monitor the driver's attention level and detect signs of drowsiness or distraction. The system can issue warnings or implement preventive measures to ensure driver safety.

Edge computing empowers self-driving cars by enabling real-time processing, reducing latency, enhancing data privacy, and optimizing bandwidth usage. By leveraging local processing capabilities, self-driving cars can make rapid decisions, adapt to changing environments, and ensure safer and more efficient autonomous driving experiences.

*Digital Twin*

A digital twin can simulate different scenarios and predict outcomes based on real-time data collected from the physical environment. This simulation capability empowers proactive maintenance, optimization of operations, and the prediction of potential issues or failures. Decision makers can use digital twins to test and validate different strategies, identify inefficiencies, and optimize performance [CertMagic].

With edge computing, real-time data is collected, processed, and analyzed directly at the edge, allowing for the accurate monitoring and simulation of physical assets. Moreover, edge computing effectively minimizes latency, enabling rapid responses to dynamic conditions as computational resources are brought closer to the physical object. Running digital twin processing at the edge enables organizations to obtain timely insights and make informed decisions that maximize efficiency and performance.

*Other Use Cases*

Artificial intelligence (AI) and machine learning (ML) systems at the edge empower real-time analysis, faster decision-making, reduced latency, improved operational efficiency, and personalized experiences across various industries by bringing AI and ML capabilities closer to edge devices.

      In addition, oneM2M has studied several IoT edge computing use
      cases, which are documented in [oneM2M-TR0001], [oneM2M-TR0018],
      and [oneM2M-TR0026].  The edge-computing-related requirements
      raised through the analysis of these use cases are captured in
      [oneM2M-TS0002].

3. IoT Challenges Leading toward Edge Computing

This section describes the challenges faced by the IoT that are motivating the adoption of edge computing. These are distinct from the research challenges applicable to IoT edge computing, some of which are mentioned in Section 4.

IoT technology is used with increasingly demanding applications in domains such as industrial, automotive, and healthcare, which leads to new challenges. For example, industrial machines, such as laser cutters, produce over 1 terabyte of data per hour, and similar amounts can be generated in autonomous cars [NVIDIA]. 90% of IoT data is expected to be stored, processed, analyzed, and acted upon close to the source [Kelly], as cloud computing models alone cannot address these new challenges [Chiang].

Below, we discuss IoT use case requirements that are moving cloud capabilities to be more proximate, distributed, and disaggregated.

3.1. Time Sensitivity

Often, many industrial control systems, such as manufacturing systems, smart grids, and oil and gas systems, require stringent end- to-end latency between the sensor and control nodes. While some IoT applications may require latency below a few tens of milliseconds [Weiner], industrial robots and motion control systems have use cases for cycle times in the order of microseconds [IEC_IEEE_60802]. In some cases, speed-of-light limitations may simply prevent cloud-based solutions; however, this is not the only challenge relative to time sensitivity. Guarantees for bounded latency and jitter ([RFC8578], Section 7) are also important for industrial IoT applications. This means that control packets must arrive with as little variation as possible and within a strict deadline. Given the best-effort characteristics of the Internet, this challenge is virtually impossible to address without using end-to-end guarantees for individual message delivery and continuous data flows.

3.2. Connectivity Cost

Some IoT deployments may not face bandwidth constraints when uploading data to the cloud. Theoretically, both 5G and Wi-Fi 6 networks top out at 10 gigabits per second (i.e., 4.5 terabytes per hour), allowing the transfer of large amounts of uplink data. However, the cost of maintaining continuous high-bandwidth connectivity for such usage is unjustifiable and impractical for most IoT applications. In some settings, for example, in aeronautical communication, higher communication costs reduce the amount of data that can be practically uploaded even further. Therefore, minimizing reliance on high-bandwidth connectivity is a requirement; this can be done, for example, by processing data at the edge and deriving summarized or actionable insights that can be transmitted to the cloud.

3.3. Resilience to Intermittent Services

Many IoT devices, such as sensors, actuators, and controllers, have very limited hardware resources and cannot rely solely on their own resources to meet their computing and/or storage needs. They require reliable, uninterrupted, or resilient services to augment their capabilities to fulfill their application tasks. This is difficult and partly impossible to achieve using cloud services for systems such as vehicles, drones, or oil rigs that have intermittent network connectivity. Conversely, a cloud backend might want to access device data even if the device is currently asleep.

3.4. Privacy and Security

When IoT services are deployed at home, personal information can be learned from detected usage data. For example, one can extract information about employment, family status, age, and income by analyzing smart meter data [ENERGY]. Policy makers have begun to provide frameworks that limit the usage of personal data and impose strict requirements on data controllers and processors. Data stored indefinitely in the cloud also increases the risk of data leakage, for instance, through attacks on rich targets.

It is often argued that industrial systems do not provide privacy implications, as no personal data is gathered. However, data from such systems is often highly sensitive, as one might be able to infer trade secrets, such as the setup of production lines. Hence, owners of these systems are generally reluctant to upload IoT data to the cloud.

Furthermore, passive observers can perform traffic analysis on device-to-cloud paths. Therefore, hiding traffic patterns associated with sensor networks can be another requirement for edge computing.

4. IoT Edge Computing Functions

We first look at the current state of IoT edge computing (Section 4.1) and then define a general system model (Section 4.2). This provides a context for IoT edge computing functions, which are listed in Sections 4.3, 4.4, and 4.5.

4.1. Overview of IoT Edge Computing

This section provides an overview of the current (at the time of writing) IoT edge computing field based on a limited review of standards, research, and open-source and proprietary products in [EDGE-COMPUTING-BACKGROUND].

IoT gateways, both open-source (such as EdgeX Foundry or Home Edge) and proprietary products, represent a common class of IoT edge computing products, where the gateway provides a local service on customer premises and is remotely managed through a cloud service. IoT communication protocols are typically used between IoT devices and the gateway, including a Constrained Application Protocol (CoAP) [RFC7252], Message Queuing Telemetry Transport (MQTT) [MQTT5], and many specialized IoT protocols (such as Open Platform Communications Unified Architecture (OPC UA) and Data Distribution Service (DDS) in the industrial IoT space), while the gateway communicates with the distant cloud typically using HTTPS. Virtualization platforms enable the deployment of virtual edge computing functions (using Virtual Machines (VMs) and application containers), including IoT gateway software, on servers in the mobile network infrastructure (at base stations and concentration points), edge data centers (in central offices), and regional data centers located near central offices. End devices are envisioned to become computing devices in forward- looking projects but are not commonly used at the time of writing.

In addition to open-source and proprietary solutions, a horizontal IoT service layer is standardized by the oneM2M standards body to reduce fragmentation, increase interoperability, and promote reuse in the IoT ecosystem. Furthermore, ETSI Multi-access Edge Computing (MEC) developed an IoT API [ETSI_MEC_33] that enables the deployment of heterogeneous IoT platforms and provides a means to configure the various components of an IoT system.

Physical or virtual IoT gateways can host application programs that are typically built using an SDK to access local services through a programmatic API. Edge cloud system operators host their customers' application VMs or containers on servers located in or near access networks that can implement local edge services. For example, mobile networks can provide edge services for radio network information, location, and bandwidth management.

Resilience in the IoT can entail the ability to operate autonomously in periods of disconnectedness to preserve the integrity and safety of the controlled system, possibly in a degraded mode. IoT devices and gateways are often expected to operate in always-on and unattended modes, using fault detection and unassisted recovery functions.

The life-cycle management of services and applications on physical IoT gateways is generally cloud based. Edge cloud management platforms and products (such as StarlingX, Akraino Edge Stack, or proprietary products from major cloud providers) adapt cloud management technologies (e.g., Kubernetes) to the edge cloud, that is, to smaller, distributed computing devices running outside a controlled data center. Typically, the service and application life cycle is using an NFV-like management and orchestration model.

The platform generally enables advertising or consuming services hosted on the platform (e.g., the Mp1 interface in ETSI MEC supports service discovery and communication), and enables communication with local and remote endpoints (e.g., message routing function in IoT gateways). The platform is usually extensible to edge applications because it can advertise a service that other edge applications can consume. The IoT communication services include protocol translation, analytics, and transcoding. Communication between edge computing devices is enabled in tiered or distributed deployments.

An edge cloud platform may enable pass-through without storage or local storage (e.g., on IoT gateways). Some edge cloud platforms use distributed storage such as that provided by a distributed storage platform (e.g., EdgeFS and Ceph) or, in more experimental settings, by an Information-Centric Networking (ICN) network, for example, systems such as Chipmunk [Chipmunk] and Kua [Kua] have been proposed as distributed information-centric objects stores. External storage, for example, on databases in a distant or local IT cloud, is typically used for filtered data deemed worthy of long-term storage; although, in some cases, it may be for all data, for example, when required for regulatory reasons.

Stateful computing is the default on most systems, VMs, and containers. Stateless computing is supported on platforms providing a "serverless computing" service (also known as function-as- a-service, e.g., using stateless containers) or on systems based on named function networking.

In many IoT use cases, a typical network usage pattern is a high- volume uplink with some form of traffic reduction enabled by processing over edge computing devices. Alternatives to traffic reduction include deferred transmission (to off-peak hours or using physical shipping). Downlink traffic includes application control and software updates. Downlink-heavy traffic patterns are not excluded but are more often associated with non-IoT usage (e.g., video Content Delivery Networks (CDNs)).

4.2. General Model

Edge computing is expected to play an important role in deploying new IoT services integrated with big data and AI enabled by flexible in- network computing platforms. Although there are many approaches to edge computing, this section lays out an attempt at a general model and lists associated logical functions. In practice, this model can be mapped to different architectures, such as:

  • A single IoT gateway, or a hierarchy of IoT gateways, typically connected to the cloud (e.g., to extend the centralized cloud- based management of IoT devices and data to the edge). The IoT gateway plays a common role in providing access to a heterogeneous set of IoT devices and sensors, handling IoT data, and delivering IoT data to its final destination in a cloud network. An IoT gateway requires interactions with the cloud; however, it can also operate independently in a disconnected mode.
  • A set of distributed computing nodes, for example, embedded in switches, routers, edge cloud servers, or mobile devices. Some IoT devices have sufficient computing capabilities to participate in such distributed systems owing to advances in hardware technology. In this model, edge computing nodes can collaborate to share resources.
  • A hybrid system involving both IoT gateways and supporting functions in distributed computing nodes.

In the general model described in Figure 1, the edge computing domain is interconnected with IoT devices (southbound connectivity), possibly with a remote (e.g., cloud) network (northbound connectivity), and with a service operator's system. Edge computing nodes provide multiple logical functions or components that may not be present in a given system. They may be implemented in a centralized or distributed fashion, at the network edge, or through interworking between the edge network and remote cloud networks.

                +---------------------+
                |   Remote Network    |  +---------------+
                |(e.g., cloud network)|  |   Service     |
                +-----------+---------+  |   Operator    |
                            |            +------+--------+
                            |                   |
             +--------------+-------------------+-----------+
             |            Edge Computing Domain             |
             |                                              |
             |   One or more computing nodes                |
             |   (IoT gateway, end devices, switches,       |
             |   routers, mini/micro-data centers, etc.)    |
             |                                              |
             |   OAM Components                             |
             |   - Resource Discovery and Authentication    |
             |   - Edge Organization and Federation         |
             |   - Multi-Tenancy and Isolation              |
             |   - ...                                      |
             |                                              |
             |   Functional Components                      |
             |   - In-Network Computation                   |
             |   - Edge Caching                             |
             |   - Communication                            |
             |   - Other Services                           |
             |   - ...                                      |
             |                                              |
             |   Application Components                     |
             |   - IoT Devices Management                   |
             |   - Data Management and Analytics            |
             |   - ...                                      |
             |                                              |
             +------+--------------+-------- - - - -+- - - -+
                    |              |       |        |       |
                    |              |          +-----+--+
               +----+---+    +-----+--+    |  |Compute |    |
               |  End   |    |  End   | ...   |Node/End|
               |Device 1|    |Device 2| ...|  |Device n|    |
               +--------+    +--------+       +--------+
                                           + - - - - - - - -+

Figure 1: Model of IoT Edge Computing

In the distributed model described in Figure 2, the edge computing domain is composed of IoT edge gateways and IoT devices that are also used as computing nodes. Edge computing domains are connected to a remote (e.g., cloud) network and their respective service operator's system. The computing nodes provide logical functions, for example, as part of distributed machine learning or distributed image processing applications. The processing capabilities in IoT devices are limited; they require the support of other nodes. In a distributed machine learning application, the training process for AI services can be executed at IoT edge gateways or cloud networks, and the prediction (inference) service is executed in the IoT devices. Similarly, in a distributed image processing application, some image processing functions can be executed at the edge or in the cloud. To limit the amount of data to be uploaded to central cloud functions, IoT edge devices may pre-process data.

             +----------------------------------------------+
             |            Edge Computing Domain             |
             |                                              |
             | +--------+    +--------+        +--------+   |
             | |Compute |    |Compute |        |Compute |   |
             | |Node/End|    |Node/End|  ....  |Node/End|   |
             | |Device 1|    |Device 2|  ....  |Device m|   |
             | +----+---+    +----+---+        +----+---+   |
             |      |             |                 |       |
             |  +---+-------------+-----------------+--+    |
             |  |           IoT Edge Gateway           |    |
             |  +-----------+-------------------+------+    |
             |              |                   |           |
             +--------------+-------------------+-----------+
                            |                   |
                +-----------+---------+  +------+-------+
                |   Remote Network    |  |   Service    |
                |(e.g., cloud network)|  |  Operator(s) |
                +-----------+---------+  +------+-------+
                            |                   |
             +--------------+-------------------+-----------+
             |              |                   |           |
             |  +-----------+-------------------+------+    |
             |  |           IoT Edge Gateway           |    |
             |  +---+-------------+-----------------+--+    |
             |      |             |                 |       |
             | +----+---+    +----+---+        +----+---+   |
             | |Compute |    |Compute |        |Compute |   |
             | |Node/End|    |Node/End|  ....  |Node/End|   |
             | |Device 1|    |Device 2|  ....  |Device n|   |
             | +--------+    +--------+        +--------+   |
             |                                              |
             |            Edge Computing Domain             |
             +----------------------------------------------+

Figure 2: Example of Machine Learning over a Distributed IoT Edge

Computing System

In the following, we enumerate major edge computing domain components. Here, they are loosely organized into Operations, Administration, and Maintenance (OAM); functional; and application components, with the understanding that the distinction between these classes may not always be clear, depending on actual system architectures. Some representative research challenges are associated with those functions. We used input from coauthors, participants of T2TRG meetings, and some comprehensive reviews of the field ([Yousefpour], [Zhang2], and [Khan]).

4.3. OAM Components

Edge computing OAM extends beyond the network-related OAM functions listed in [RFC6291]. In addition to infrastructure (network, storage, and computing resources), edge computing systems can also include computing environments (for VMs, software containers, and functions), IoT devices, data, and code.

Operation-related functions include performance monitoring for Service Level Agreement (SLA) measurements, fault management, and provisioning for links, nodes, compute and storage resources, platforms, and services. Administration covers network/compute/ storage resources, platform and service discovery, configuration, and planning. Discovery during normal operation (e.g., discovery of compute or storage nodes by endpoints) is typically not included in OAM; however, in this document, we do not address it separately. Management covers the monitoring and diagnostics of failures, as well as means to minimize their occurrence and take corrective actions. This may include software update management and high service availability through redundancy and multipath communication. Centralized (e.g., Software-Defined Networking (SDN)) and decentralized management systems can be used. Finally, we arbitrarily chose to address data management as an application component; however, in some systems, data management may be considered similar to a network management function.

We further detail a few relevant OAM components.

4.3.1. Resource Discovery and Authentication

Discovery and authentication may target platforms and infrastructure resources, such as computing, networking, and storage, as well as other resources, such as IoT devices, sensors, data, code units, services, applications, and users interacting with the system. In a broker-based system, an IoT gateway can act as a broker to discover IoT resources. More decentralized solutions can also be used in replacement of or in complement to the broker-based solutions; for example, CoAP enables multicast discovery of an IoT device and CoAP service discovery enables one to obtain a list of resources made available by this device [RFC7252]. For device authentication, current centralized gateway-based systems rely on the installation of a secret on IoT devices and computing devices (e.g., a device certificate stored in a hardware security module or a combination of code and data stored in a trusted execution environment).

Related challenges include:

  • Discovery, authentication, and trust establishment between IoT devices, compute nodes, and platforms, with regard to concerns such as mobility, heterogeneous devices and networks, scale, multiple trust domains, constrained devices, anonymity, and traceability.
  • Intermittent connectivity to the Internet, removing the need to rely on a third-party authority [Echeverria].
   *  Resiliency to failure [Harchol], denial-of-service attacks, and
   
      easier physical access for attackers.

4.3.2. Edge Organization and Federation

In a distributed system context, once edge devices have discovered and authenticated each other, they can be organized or self-organized into hierarchies or clusters. The organizational structure may range from centralized to peer-to-peer, or it may be closely tied to other systems. Such groups can also form federations with other edges or with remote clouds.

Related challenges include:

  • Support for scaling and enabling fault tolerance or self-healing [Jeong]. In addition to using a hierarchical organization to cope with scaling, another available and possibly complementary mechanism is multicast [RFC7390] [CORE-GROUPCOMM-BIS]. Other approaches include relying on blockchains [Ali].
  • Integration of edge computing with virtualized Radio Access Networks (Fog RAN) [SFC-FOG-RAN] and 5G access networks.
  • Sharing resources in multi-vendor and multi-operator scenarios to optimize criteria such as profit [Anglano], resource usage, latency, and energy consumption.
  • Capacity planning, placement of infrastructure nodes to minimize delay [Fan], cost, energy, etc.
   *  Incentives for participation, for example, in peer-to-peer
      federation schemes.
  • Design of federated AI over IoT edge computing systems [Brecko], for example, for anomaly detection.

4.3.3. Multi-Tenancy and Isolation

Some IoT edge computing systems make use of virtualized (compute, storage, and networking) resources to address the need for secure multi-tenancy at the edge. This leads to "edge clouds" that share properties with remote clouds and can reuse some of their ecosystems. Virtualization function management is largely covered by ETSI NFV and MEC standards and recommendations. Projects such as [LFEDGE-EVE] further cover virtualization and its management in distributed edge computing settings.

Related challenges include:

  • Adapting cloud management platforms to the edge to account for its distributed nature, heterogeneity, need for customization, and limited resources (for example, using Conflict-free Replicated Data Types (CRDTs) [Jeffery] or intent-based management mechanisms [Cao]).
  • Minimizing virtual function instantiation time and resource usage.

4.4. Functional Components

4.4.1. In-Network Computation

A core function of IoT edge computing is to enable local computation on a node at the network edge, typically for application-layer processing, such as processing input data from sensors, making local decisions, preprocessing data, and offloading computation on behalf of a device, service, or user. Related functions include orchestrating computation (in a centralized or distributed manner) and managing application life cycles. Support for in-network computation may vary in terms of capability; for example, computing nodes can host virtual machines, software containers, software actors, unikernels running stateful or stateless code, or a rule engine providing an API to register actions in response to conditions (such as an IoT device ID, sensor values to check, thresholds, etc.).

Edge offloading includes offloading to and from an IoT device and to and from a network node. [Cloudlets] describes an example of offloading computation from an end device to a network node. In contrast, oneM2M is an example of a system that allows a cloud-based IoT platform to transfer resources and tasks to a target edge node [oneM2M-TR0052]. Once transferred, the edge node can directly support IoT devices that it serves with the service offloaded by the cloud (e.g., group management, location management, etc.).

QoS can be provided in some systems through the combination of network QoS (e.g., traffic engineering or wireless resource scheduling) and compute and storage resource allocations. For example, in some systems, a bandwidth manager service can be exposed to enable allocation of the bandwidth to or from an edge computing application instance.

In-network computation can leverage the underlying services provided using data generated by IoT devices and access networks. Such services include IoT device location, radio network information, bandwidth management, and congestion management (e.g., the congestion management feature of oneM2M [oneM2M-TR0052]).

Related challenges include:

   *  Computation placement: in a centralized or distributed (e.g.,
      peer-to-peer) manner, selecting an appropriate compute device.
      The selection is based on available resources, location of data
      input and data sinks, compute node properties, etc. with varying
      goals.  These goals include end-to-end latency, privacy, high
      availability, energy conservation, or network efficiency (for
      example, using load-balancing techniques to avoid congestion).
  • Onboarding code on a platform or computing device and invoking remote code execution, possibly as part of a distributed programming model and with respect to similar concerns of latency, privacy, etc. For example, offloading can be included in a vehicular scenario [Grewe]. These operations should deal with heterogeneous compute nodes [Schafer] and may also support end devices, including IoT devices, as compute nodes [Larrea].
  • Adapting Quality of Results (QoR) for applications where a perfect result is not necessary [Li].
  • Assisted or automatic partitioning of code. For example, for application programs [COIN-APPCENTRES] or network programs [REQS-P4COMP].
  • Supporting computation across trust domains. For example, verifying computation results.
  • Supporting computation mobility: relocating an instance from one compute node to another while maintaining a given service level; session continuity when communicating with end devices that are mobile, possibly at high speed (e.g., in vehicular scenarios); defining lightweight execution environments for secure code mobility, for example, using WebAssembly [Nieke].
  • Defining, managing, and verifying SLAs for edge computing systems; pricing is a challenging task.

4.4.2. Edge Storage and Caching

Local storage or caching enables local data processing (e.g., preprocessing or analysis) as well as delayed data transfer to the cloud or delayed physical shipping. An edge node may offer local data storage (in which persistence is subject to retention policies), caching, or both. Generally, "caching" refers to temporary storage to improve performance without persistence guarantees. An edge- caching component manages data persistence; for example, it schedules the removal of data when it is no longer needed. Other related aspects include the authentication and encryption of data. Edge storage and caching can take the form of a distributed storage system.

Related challenges include:

  • Cache and data placement: using cache positioning and data placement strategies to minimize data retrieval delay [Liu] and energy consumption. Caches may be positioned in the access- network infrastructure or on end devices.
   *  Maintaining consistency, freshness, reliability, and privacy of
      data stored or cached in systems that are distributed,
      constrained, and dynamic (e.g., due to node mobility, energy-
      saving regimes, and disruptions) and which can have additional
      data governance constraints on data storage location.  For
      example, [Mortazavi] describes leveraging a hierarchical storage
      organization.  Freshness-related metrics include the age of
      information [Yates] that captures the timeliness of information
      received from a sender (e.g., an IoT device).

4.4.3. Communication

An edge cloud may provide a northbound data plane or management plane interface to a remote network, such as a cloud, home, or enterprise network. This interface does not exist in stand-alone (local-only) scenarios. To support such an interface when it exists, an edge computing component needs to expose an API, deal with authentication and authorization, and support secure communication.

An edge cloud may provide an API or interface to local or mobile users, for example, to provide access to services and applications or to manage data published by local or mobile devices.

Edge computing nodes communicate with IoT devices over a southbound interface, typically for data acquisition and IoT device management.

Communication brokering is a typical function of IoT edge computing that facilitates communication with IoT devices, enables clients to register as recipients for data from devices, forwards traffic to or from IoT devices, enables various data discovery and redistribution patterns (for example, north-south with clouds and east-west with other edge devices [EDGE-DATA-DISCOVERY-OVERVIEW]). Another related aspect is dispatching alerts and notifications to interested consumers both inside and outside the edge computing domain. Protocol translation, analytics, and video transcoding can also be performed when necessary. Communication brokering may be centralized in some systems, for example, using a hub-and-spoke message broker or distributed with message buses, possibly in a layered bus approach. Distributed systems can leverage direct communication between end devices over device-to-device links. A broker can ensure communication reliability and traceability and, in some cases, transaction management.

Related challenges include:

  • Defining edge computing abstractions, such as PaaS [Yangui], suitable for users and cloud systems to interact with edge computing systems and dealing with interoperability issues, such as data-model heterogeneity.
  • Enabling secure and resilient communication between IoT devices and a remote cloud, for example, through multipath support.

4.5. Application Components

IoT edge computing can host applications, such as those mentioned in Section 2.4. While describing the components of individual applications is out of our scope, some of those applications share similar functions, such as IoT device management and data management, as described below.

4.5.1. IoT Device Management

IoT device management includes managing information regarding IoT devices, including their sensors and how to communicate with them. Edge computing addresses the scalability challenges of a large number of IoT devices by separating the scalability domain into local (e.g., edge) networks and remote networks. For example, in the context of the oneM2M standard, a device management functionality (called "software campaign" in oneM2M) enables the installation, deletion, activation, and deactivation of software functions and services on a potentially large number of edge nodes [oneM2M-TR0052]. Using a dashboard or management software, a service provider issues these requests through an IoT cloud platform supporting the software campaign functionality.

The challenges listed in Section 4.3.1 may be applicable to IoT device management as well.

4.5.2. Data Management and Analytics

Data storage and processing at the edge are major aspects of IoT edge computing, directly addressing the high-level IoT challenges listed in Section 3. Data analysis, for example, through AI/ML tasks performed at the edge, may benefit from specialized hardware support on the computing nodes.

Related challenges include:

  • Addressing concerns regarding resource usage, security, and privacy when sharing, processing, discovering, or managing data: for example, presenting data in views composed of an aggregation of related data [Zhang], protecting data communication between authenticated peers [Basudan], classifying data (e.g., in terms of privacy, importance, and validity), and compressing and encrypting data, for example, using homomorphic encryption to directly process encrypted data [Stanciu].
   *  Other concerns regarding edge data discovery (e.g., streaming
      data, metadata, and events) include siloization and lack of
      standards in edge environments that can be dynamic (e.g.,
      vehicular networks) and heterogeneous
      [EDGE-DATA-DISCOVERY-OVERVIEW].
   
   *  Data-driven programming models [Renart], for example, those that
      are event based, including handling naming and data abstractions.
  • Data integration in an environment without data standardization or where different sources use different ontologies [Farnbauer-Schmidt].
  • Addressing concerns such as limited resources, privacy, and dynamic and heterogeneous environments to deploy machine learning at the edge: for example, making machine learning more lightweight and distributed (e.g., enabling distributed inference at the edge), supporting shorter training times and simplified models, and supporting models that can be compressed for efficient communication [Murshed].
  • Although edge computing can support IoT services independently of cloud computing, it can also be connected to cloud computing. Thus, the relationship between IoT edge computing and cloud computing, with regard to data management, is another potential challenge [ISO_TR].

4.6. Simulation and Emulation Environments

IoT edge computing introduces new challenges to the simulation and emulation tools used by researchers and developers. A varied set of applications, networks, and computing technologies can coexist in a distributed system, making modeling difficult. Scale, mobility, and resource management are additional challenges [SimulatingFog].

Tools include simulators, where simplified application logic runs on top of a fog network model, and emulators, where actual applications can be deployed, typically in software containers, over a cloud infrastructure (e.g., Docker and Kubernetes) running over a network emulating network edge conditions, such as variable delays, throughput, and mobility events. To gain in scale, emulated and simulated systems can be used together in hybrid federation-based approaches [PseudoDynamicTesting]; whereas to gain in realism, physical devices can be interconnected with emulated systems. Examples of related work and platforms include the publicly accessible MEC sandbox work recently initiated in ETSI [ETSI_Sandbox] and open-source simulators and emulators ([AdvantEDGE] emulator and tools cited in [SimulatingFog]). EdgeNet [Senel] is a globally distributed edge cloud for Internet researchers, which uses nodes contributed by institutions and which is based on Docker for containerization and Kubernetes for deployment and node management.

Digital twins are virtual instances of a physical system (twin) that are continually updated with the latter's performance, maintenance, and health status data throughout the life cycle of the physical system [Madni]. In contrast to an emulation or simulated environment, digital twins, once generated, are maintained in sync by their physical twin, which can be, among many other instances, an IoT device, edge device, or an edge network. The benefits of digital twins go beyond those of emulation and include accelerated business processes, enhanced productivity, and faster innovation with reduced costs [NETWORK-DIGITAL-TWIN-ARCH].

5. Security Considerations

Privacy and security are drivers of the adoption of edge computing for the IoT (Section 3.4). As discussed in Section 4.3.1, authentication and trust (among computing nodes, management nodes, and end devices) can be challenging as scale, mobility, and heterogeneity increase. The sometimes disconnected nature of edge resources can avoid reliance on third-party authorities. Distributed edge computing is exposed to reliability and denial-of-service attacks. A personal or proprietary IoT data leakage is also a major threat, particularly because of the distributed nature of the systems (Section 4.5.2). Furthermore, blockchain-based distributed IoT edge computing must be designed for privacy, since public blockchain addressing does not guarantee absolute anonymity [Ali].

However, edge computing also offers solutions in the security space: maintaining privacy by computing sensitive data closer to data generators is a major use case for IoT edge computing. An edge cloud can be used to perform actions based on sensitive data or to anonymize or aggregate data prior to transmission to a remote cloud server. Edge computing communication brokering functions can also be used to secure communication between edge and cloud networks.

6. Conclusion

IoT edge computing plays an essential role, complementary to the cloud, in enabling IoT systems in certain situations. In this document, we presented use cases and listed the core challenges faced by the IoT that drive the need for IoT edge computing. Therefore, the first part of this document may help focus future research efforts on the aspects of IoT edge computing where it is most useful. The second part of this document presents a general system model and structured overview of the associated research challenges and related work. The structure, based on the system model, is not meant to be restrictive and exists for the purpose of having a link between individual research areas and where they are applicable in an IoT edge computing system.

7. IANA Considerations

This document has no IANA actions.

8. Informative References

[AdvantEDGE]

              "AdvantEDGE, Mobile Edge Emulation Platform", commit
              8f6edbe, May 2023,
              <https://github.com/InterDigitalInc/AdvantEDGE>.
   
   [Ali]      Ali, M., Vecchio, M., and F. Antonelli, "Enabling a
              Blockchain-Based IoT Edge", IEEE Internet of Things
              Magazine, vol. 1, no.2, pp. 24-29,
              DOI 10.1109/IOTM.2019.1800024, December 2018,
              <https://doi.org/10.1109/IOTM.2019.1800024>.
   
   [Anglano]  Anglano, C., Canonico, M., Castagno, P., Guazzone, M., and
              M. Sereno, "A game-theoretic approach to coalition
              formation in fog provider federations", 2018 Third
              International Conference on Fog and Mobile Edge Computing
              (FMEC), DOI 10.1109/fmec.2018.8364054, April 2018,
              <https://doi.org/10.1109/fmec.2018.8364054>.
   
   [Argungu]  Argungu, J., Idina, M., Chalawa, U., Ummar, M., Bello, S.,
              Arzika, I., and B. Mala, "A Survey of Edge Computing
              Approaches in Smart Factory", International Journal of
              Advanced Research in Computer and Communication
              Engineering, Vol. 12, Issue 9, September 2023.
   
   [Ashton]   Ashton, K., "That 'Internet of Things' Thing", RFID
              Journal, vol. 22, no. 7, pp. 97-114, June 2009,
              <http://www.itrco.jp/libraries/RFIDjournal-
              That%20Internet%20of%20Things%20Thing.pdf>.
   
   [Badjie]   Badjie, B., "The Future of Autonomous Driving Systems with
              Edge Computing", September 2023,
              <https://medium.com/@bakarykumba1996/the-future-of-
              autonomous-driving-systems-with-edge-computing-
              8c919597c4ee>.
   
   [Basudan]  Basudan, S., Lin, X., and K. Sankaranarayanan, "A Privacy-
              Preserving Vehicular Crowdsensing-Based Road Surface
              Condition Monitoring System Using Fog Computing", IEEE
              Internet of Things Journal, vol. 4, no. 3, pp. 772-782,
              DOI 10.1109/jiot.2017.2666783, June 2017,
              <https://doi.org/10.1109/jiot.2017.2666783>.

[BigRentz] BigRentz, "41 Construction Safety Statistics for 2024",

              February 2024, <https://www.bigrentz.com/blog/
              construction-safety-statistics>.
   
   [Botta]    Botta, A., de Donato, W., Persico, V., and A. Pescapé,
              "Integration of Cloud computing and Internet of Things: A
              survey", Future Generation Computer Systems, vol. 56, pp.
              684-700, DOI 10.1016/j.future.2015.09.021, March 2016,
              <https://doi.org/10.1016/j.future.2015.09.021>.
   
   [Brecko]   Brecko, A., Kajáti, E., Koziorek, J., and I. Zolotová,
              "Federated Learning for Edge Computing: A Survey", Applied
              Sciences 12(18):9124, DOI 10.3390/app12189124, September
              2022, <https://doi.org/10.3390/app12189124>.
   
   [Cao]      Cao, L., Merican, A., Tootaghaj, D., Ahmed, F., Sharma,
              P., and V. Saxena, "eCaaS: A Management Framework of Edge
              Container as a Service for Business Workload", Proceedings
              of the 4th International Workshop on Edge Systems,
              Analytics and Networking, DOI 10.1145/3434770.3459741,
              April 2021, <https://doi.org/10.1145/3434770.3459741>.

[CertMagic]

              CertMagic, "Digital Twin Technology: Simulating Real-World
              Scenarios for Enhanced Decision Making", May 2023,
              <https://certmagic.medium.com/digital-twin-technology-
              simulating-real-world-scenarios-for-enhanced-decision-
              making-8844c51e856d>.
   
   [Chen]     Chen, B., Wan, J., Celesti, A., Li, D., Abbas, H., and Q.
              Zhang, "Edge Computing in IoT-Based Manufacturing", IEEE
              Communications Magazine, vol. 56, no. 9, pp. 103-109,
              DOI 10.1109/mcom.2018.1701231, September 2018,
              <https://doi.org/10.1109/mcom.2018.1701231>.
   
   [Chiang]   Chiang, M. and T. Zhang, "Fog and IoT: An Overview of
              Research Opportunities", IEEE Internet of Things Journal,
              vol. 3, no. 6, pp. 854-864, DOI 10.1109/jiot.2016.2584538,
              December 2016,
              <https://doi.org/10.1109/jiot.2016.2584538>.

[Chipmunk] Shin, Y., Park, S., Ko, N., and A. Jeong, "Chipmunk:

Distributed Object Storage for NDN", Proceedings of the 7th ACM Conference on Information-Centric Networking, ACM, DOI 10.1145/3405656.3420231, September 2020, <https://doi.org/10.1145/3405656.3420231>.

[Cloudlets]

              Satyanarayanan, M., Bahl, P., Caceres, R., and N. Davies,
              "The Case for VM-Based Cloudlets in Mobile Computing",
              IEEE Pervasive Computing, vol. 8, no. 4, pp. 14-23,
              DOI 10.1109/mprv.2009.82, October 2009,
              <https://doi.org/10.1109/mprv.2009.82>.

[COIN-APPCENTRES]

              Trossen, D., Sarathchandra, C., and M. Boniface, "In-
              Network Computing for App-Centric Micro-Services", Work in
              Progress, Internet-Draft, draft-sarathchandra-coin-
              appcentres-04, 26 January 2021,
              <https://datatracker.ietf.org/doc/html/draft-
              sarathchandra-coin-appcentres-04>.

[CORE-GROUPCOMM-BIS]

              Dijk, E., Wang, C., and M. Tiloca, "Group Communication
              for the Constrained Application Protocol (CoAP)", Work in
              Progress, Internet-Draft, draft-ietf-core-groupcomm-bis-
              10, 23 October 2023,
              <https://datatracker.ietf.org/doc/html/draft-ietf-core-
              groupcomm-bis-10>.

[Echeverria]

              Echeverría, S., Klinedinst, D., Williams, K., and G.
              Lewis, "Establishing Trusted Identities in Disconnected
              Edge Environments", 2016 IEEE/ACM Symposium on Edge
              Computing (SEC), DOI 10.1109/sec.2016.27, October 2016,
              <https://doi.org/10.1109/sec.2016.27>.

[EDGE-COMPUTING-BACKGROUND]

              de Foy, X., Hong, J., Hong, Y., Kovatsch, M., Schooler,
              E., and D. Kutscher, "IoT Edge Computing: Initiatives,
              Projects and Products", Work in Progress, Internet-Draft,
              draft-defoy-t2trg-iot-edge-computing-background-00, 25 May
              2020, <https://datatracker.ietf.org/doc/html/draft-defoy-
              t2trg-iot-edge-computing-background-00>.

[EDGE-DATA-DISCOVERY-OVERVIEW]

              McBride, M., Kutscher, D., Schooler, E., Bernardos, C. J.,
              Lopez, D., and X. de Foy, "Edge Data Discovery for COIN",
              Work in Progress, Internet-Draft, draft-mcbride-edge-data-
              discovery-overview-05, 1 November 2020,
              <https://datatracker.ietf.org/doc/html/draft-mcbride-edge-
              data-discovery-overview-05>.
   
   [ENERGY]   Beckel, C., Sadamori, L., Staake, T., and S. Santini,
              "Revealing household characteristics from smart meter
              data", Energy, vol. 78, pp. 397-410,
              DOI 10.1016/j.energy.2014.10.025, December 2014,
              <https://doi.org/10.1016/j.energy.2014.10.025>.

[ETSI_MEC_01]

              ETSI, "Multi-access Edge Computing (MEC); Terminology",
              V2.1.1, ETSI GS MEC 001, January 2019,
              <https://www.etsi.org/deliver/etsi_gs/
              MEC/001_099/001/02.01.01_60/gs_MEC001v020101p.pdf>.

[ETSI_MEC_03]

              ETSI, "Multi-access Edge Computing (MEC); Framework and
              Reference Architecture", V2.1.1, ETSI GS MEC 003, January
              2019, <https://www.etsi.org/deliver/etsi_gs/
              MEC/001_099/003/02.01.01_60/gs_MEC003v020101p.pdf>.

[ETSI_MEC_33]

              ETSI, "Multi-access Edge Computing (MEC); IoT API",
              V3.1.1, ETSI GS MEC 033, December 2022,
              <https://www.etsi.org/deliver/etsi_gs/
              MEC/001_099/033/03.01.01_60/gs_MEC033v030101p.pdf>.

[ETSI_Sandbox]

              ETSI, "Multi-access Edge Computing (MEC) MEC Sandbox",
              Portal, September 2023,
              <https://portal.etsi.org/webapp/WorkProgram/
              Report_WorkItem.asp?WKI_ID=57671>.
   
   [Fan]      Fan, Q. and N. Ansari, "Cost Aware cloudlet Placement for
              big data processing at the edge", 2017 IEEE International
              Conference on Communications (ICC),
              DOI 10.1109/icc.2017.7996722, May 2017,
              <https://doi.org/10.1109/icc.2017.7996722>.

[Farnbauer-Schmidt]

              Farnbauer-Schmidt, M., Lindner, J., Kaffenberger, C., and
              J. Albrecht, "Combining the Concepts of Semantic Data
              Integration and Edge Computing", INFORMATIK 2019: 50 Jahre
              Gesellschaft für Informatik - Informatik für Gesellschaf,
              pp. 139-152, DOI 10.18420/inf2019_19, September 2019,
              <https://doi.org/10.18420/inf2019_19>.
   
   [Grewe]    Grewe, D., Wagner, M., Arumaithurai, M., Psaras, I., and
              D. Kutscher, "Information-Centric Mobile Edge Computing
              for Connected Vehicle Environments: Challenges and
              Research Directions", Proceedings of the Workshop on
              Mobile Edge Communications, pp. 7-12,
              DOI 10.1145/3098208.3098210, August 2017,
              <https://doi.org/10.1145/3098208.3098210>.
   
   [Harchol]  Harchol, Y., Mushtaq, A., McCauley, J., Panda, A., and S.
              Shenker, "CESSNA: Resilient Edge-Computing", Proceedings
              of the 2018 Workshop on Mobile Edge Communications,
              DOI 10.1145/3229556.3229558, August 2018,
              <https://doi.org/10.1145/3229556.3229558>.

[IEC_IEEE_60802]

              IEC/IEEE, "Use Cases IEC/IEEE 60802", V1.3, IEC/
              IEEE 60802, September 2018,
              <https://grouper.ieee.org/groups/802/1/files/public/
              docs2018/60802-industrial-use-cases-0918-v13.pdf>.
   
   [ISO_TR]   "Internet of things (IoT) - Edge computing", ISO/IEC TR
              30164:2020, April 2020,
              <https://www.iso.org/standard/53284.html>.
   
   [Jeffery]  Jeffery, A., Howard, H., and R. Mortier, "Rearchitecting
              Kubernetes for the Edge", Proceedings of the 4th
              International Workshop on Edge Systems, Analytics and
              Networking, DOI 10.1145/3434770.3459730, April 2021,
              <https://doi.org/10.1145/3434770.3459730>.
   
   [Jeong]    Jeong, T., Chung, J., Hong, J., and S. Ha, "Towards a
              distributed computing framework for Fog", 2017 IEEE Fog
              World Congress (FWC), DOI 10.1109/fwc.2017.8368528,
              October 2017, <https://doi.org/10.1109/fwc.2017.8368528>.
   
   [Jones]    Jones, D., Snider, C., Nassehi, A., Yon, J., and B. Hicks,
              "Characterising the Digital Twin: A systematic literature
              review", CIRP Journal of Manufacturing Science and
              Technology, vol. 29, pp. 36-52,
              DOI 10.1016/j.cirpj.2020.02.002, May 2020,
              <https://doi.org/10.1016/j.cirpj.2020.02.002>.
   
   [Kelly]    Kelly, R., "Internet of Things Data to Top 1.6 Zettabytes
              by 2020", April 2015,
              <https://campustechnology.com/articles/2015/04/15/
              internet-of-things-data-to-top-1-6-zettabytes-by-
              2020.aspx>.  Retrieved on 2022-05-24.
   
   [Khan]     Khan, L., Yaqoob, I., Tran, N., Kazmi, S., Dang, T., and
              C. Hong, "Edge-Computing-Enabled Smart Cities: A
              Comprehensive Survey", IEEE Internet of Things Journal,
              vol. 7, no. 10, pp. 10200-10232,
              DOI 10.1109/jiot.2020.2987070, October 2020,
              <https://doi.org/10.1109/jiot.2020.2987070>.
   
   [Kua]      Patil, V., Desai, H., and L. Zhang, "Kua: a distributed
              object store over named data networking", Proceedings of
              the 9th ACM Conference on Information-Centric Networking,
              DOI 10.1145/3517212.3558083, September 2022,
              <https://doi.org/10.1145/3517212.3558083>.
   
   [Larrea]   Larrea, J. and A. Barbalace, "The serverkernel operating
              system", Proceedings of the Third ACM International
              Workshop on Edge Systems, Analytics and Networking,
              DOI 10.1145/3378679.3394537, May 2020,
              <https://doi.org/10.1145/3378679.3394537>.

[LFEDGE-EVE]

              Linux Foundation, "Project Edge Virtualization Engine
              (EVE)", Portal, <https://www.lfedge.org/projects/eve>.
              Retrieved on 2022-05-24.
   
   [Li]       Li, Y., Chen, Y., Lan, T., and G. Venkataramani, "MobiQoR:
              Pushing the Envelope of Mobile Edge Computing Via Quality-
              of-Result Optimization", 2017 IEEE 37th International
              Conference on Distributed Computing Systems (ICDCS),
              DOI 10.1109/icdcs.2017.54, June 2017,
              <https://doi.org/10.1109/icdcs.2017.54>.
   
   [Lin]      Lin, J., Yu, W., Zhang, N., Yang, X., Zhang, H., and W.
              Zhao, "A Survey on Internet of Things: Architecture,
              Enabling Technologies, Security and Privacy, and
              Applications", IEEE Internet of Things Journal, vol. 4,
              no. 5, pp. 1125-1142, DOI 10.1109/jiot.2017.2683200,
              October 2017, <https://doi.org/10.1109/jiot.2017.2683200>.
   
   [Liu]      Liu, J., Bai, B., Zhang, J., and K. Letaief, "Cache
              Placement in Fog-RANs: From Centralized to Distributed
              Algorithms", IEEE Transactions on Wireless Communications,
              vol. 16, no. 11, pp. 7039-7051,
              DOI 10.1109/twc.2017.2737015, November 2017,
              <https://doi.org/10.1109/twc.2017.2737015>.
   
   [Madni]    Madni, A., Madni, C., and S. Lucero, "Leveraging Digital
              Twin Technology in Model-Based Systems Engineering",
              Systems 7(1):7, DOI 10.3390/systems7010007, January 2019,
              <https://doi.org/10.3390/systems7010007>.
   
   [Mahadev]  Satyanarayanan, M., "The Emergence of Edge Computing",
              Computer, vol. 50, no. 1, pp. 30-39,
              DOI 10.1109/mc.2017.9, January 2017,
              <https://doi.org/10.1109/mc.2017.9>.
   
   [Mehmood]  Mehmood, M., Oad, A., Abrar, M., Munir, H., Hasan, S.,
              Muqeet, H., and N. Golilarz, "Edge Computing for IoT-
              Enabled Smart Grid", Security and Communication Networks,
              Vol. 2021, Article ID 5524025, DOI 10.1155/2021/5524025,
              July 2021, <https://doi.org/10.1155/2021/5524025>.

[Mortazavi]

              Mortazavi, S., Balasubramanian, B., de Lara, E., and S.
              Narayanan, "Toward Session Consistency for the Edge",
              USENIX Workshop on Hot Topics in Edge Computing (HotEdge
              18), 2018,
              <https://www.usenix.org/conference/hotedge18/presentation/
              mortazavi>.
   
   [MQTT5]    Banks, A., Ed., Briggs, E., Ed., Borgendale, K., Ed., and
              R. Gupta, Ed., "MQTT Version 5.0", OASIS Standard, March
              2019, <https://docs.oasis-open.org/mqtt/mqtt/v5.0/mqtt-
              v5.0.html>.
   
   [Murshed]  Murshed, M., Murphy, C., Hou, D., Khan, N.,
              Ananthanarayanan, G., and F. Hussain, "Machine Learning at
              the Network Edge: A Survey", ACM Computing Surveys, vol.
              54, no. 8, pp. 1-37, DOI 10.1145/3469029, October 2021,
              <https://doi.org/10.1145/3469029>.

[NETWORK-DIGITAL-TWIN-ARCH]

              Zhou, C., Yang, H., Duan, X., Lopez, D., Pastor, A., Wu,
              Q., Boucadair, M., and C. Jacquenet, "Network Digital
              Twin: Concepts and Reference Architecture", Work in
              Progress, Internet-Draft, draft-irtf-nmrg-network-digital-
              twin-arch-05, 4 March 2024,
              <https://datatracker.ietf.org/doc/html/draft-irtf-nmrg-
              network-digital-twin-arch-05>.
   
   [Nieke]    Nieke, M., Almstedt, L., and R. Kapitza, "Edgedancer:
              Secure Mobile WebAssembly Services on the Edge",
              Proceedings of the 4th International Workshop on Edge
              Systems, Analytics and Networking,
              DOI 10.1145/3434770.3459731, April 2021,
              <https://doi.org/10.1145/3434770.3459731>.
   
   [NIST]     Mell, P. and T. Grance, "The NIST Definition of Cloud
              Computing", NIST Special Publication 800-145,
              DOI 10.6028/nist.sp.800-145, September 2011,
              <https://doi.org/10.6028/nist.sp.800-145>.
   
   [NVIDIA]   Grzywaczewski, A., "Training AI for Self-Driving Vehicles:
              the Challenge of Scale", NVIDIA Developer Blog, October
              2017, <https://devblogs.nvidia.com/training-self-driving-
              vehicles-challenge-scale/>.  Retrieved on 2022-05-24.
   
   [OGrady]   O'Grady, M., Langton, D., and G. O'Hare, "Edge computing:
              A tractable model for smart agriculture?", Artificial
              Intelligence in Agriculture, Vol. 3, Pages 42-51,
              DOI 10.1016/j.aiia.2019.12.001, September 2019,
              <https://doi.org/10.1016/j.aiia.2019.12.001>.

[oneM2M-TR0001]

              Mladin, C., "Use Cases Collection", oneM2M, v4.2.0,
              TR 0001, October 2018,
              <https://member.onem2m.org/Application/documentapp/
              downloadLatestRevision/default.aspx?docID=28153>.

[oneM2M-TR0018]

              Lu, C. and M. Jiang, "Industrial Domain Enablement",
              oneM2M, v2.5.2, TR 0018, February 2019,
              <https://member.onem2m.org/Application/documentapp/
              downloadLatestRevision/default.aspx?docID=29334>.

[oneM2M-TR0026]

              Yamamoto, K., Mladin, C., and V. Kueh, "Vehicular Domain
              Enablement", oneM2M, TR 0026, January 2020,
              <https://member.onem2m.org/Application/documentapp/
              downloadLatestRevision/default.aspx?docID=31410>.

[oneM2M-TR0052]

              Yamamoto, K. and C. Mladin, "Study on Edge and Fog
              Computing in oneM2M systems", oneM2M, TR 0052, September
              2020, <https://member.onem2m.org/Application/documentapp/
              downloadLatestRevision/default.aspx?docID=32633>.

[oneM2M-TS0002]

              He, S., "TS 0002, Requirements", oneM2M, TS 0002, February
              2019, <https://member.onem2m.org/Application/documentapp/
              downloadLatestRevision/default.aspx?docID=29274>.
   
   [OpenFog]  OpenFog Consortium, "OpenFog Reference Architecture for
              Fog Computing", February 2017,
              <https://iiconsortium.org/pdf/
              OpenFog_Reference_Architecture_2_09_17.pdf>.

[PseudoDynamicTesting]

              Ficco, M., Esposito, C., Xiang, Y., and F. Palmieri,
              "Pseudo-Dynamic Testing of Realistic Edge-Fog Cloud
              Ecosystems", IEEE Communications Magazine, vol. 55, no.
              11, pp. 98-104, DOI 10.1109/mcom.2017.1700328, November
              2017, <https://doi.org/10.1109/mcom.2017.1700328>.
   
   [Renart]   Renart, E., Diaz-Montes, J., and M. Parashar, "Data-Driven
              Stream Processing at the Edge", 2017 IEEE 1st
              International Conference on Fog and Edge Computing
              (ICFEC), DOI 10.1109/icfec.2017.18, May 2017,
              <https://doi.org/10.1109/icfec.2017.18>.

[REQS-P4COMP]

              Singh, H. and M. Montpetit, "Requirements for P4 Program
              Splitting for Heterogeneous Network Nodes", Work in
              Progress, Internet-Draft, draft-hsingh-coinrg-reqs-p4comp-
              03, 18 February 2021,
              <https://datatracker.ietf.org/doc/html/draft-hsingh-
              coinrg-reqs-p4comp-03>.
   
   [REST-IOT] Keränen, A., Kovatsch, M., and K. Hartke, "Guidance on
              RESTful Design for Internet of Things Systems", Work in
              Progress, Internet-Draft, draft-irtf-t2trg-rest-iot-13, 25
              January 2024, <https://datatracker.ietf.org/doc/html/
              draft-irtf-t2trg-rest-iot-13>.
   
   [RFC6291]  Andersson, L., van Helvoort, H., Bonica, R., Romascanu,
              D., and S. Mansfield, "Guidelines for the Use of the "OAM"
              Acronym in the IETF", BCP 161, RFC 6291,
              DOI 10.17487/RFC6291, June 2011,
              <https://www.rfc-editor.org/info/rfc6291>.
   
   [RFC7252]  Shelby, Z., Hartke, K., and C. Bormann, "The Constrained
              Application Protocol (CoAP)", RFC 7252,
              DOI 10.17487/RFC7252, June 2014,
              <https://www.rfc-editor.org/info/rfc7252>.
   
   [RFC7390]  Rahman, A., Ed. and E. Dijk, Ed., "Group Communication for
              the Constrained Application Protocol (CoAP)", RFC 7390,
              DOI 10.17487/RFC7390, October 2014,
              <https://www.rfc-editor.org/info/rfc7390>.
   
   [RFC8578]  Grossman, E., Ed., "Deterministic Networking Use Cases",
              RFC 8578, DOI 10.17487/RFC8578, May 2019,
              <https://www.rfc-editor.org/info/rfc8578>.
   
   [Schafer]  Schäfer, D., Edinger, J., VanSyckel, S., Paluska, J., and
              C. Becker, "Tasklets: Overcoming Heterogeneity in
              Distributed Computing Systems", 2016 IEEE 36th
              International Conference on Distributed Computing Systems
              Workshops (ICDCSW), DOI 10.1109/icdcsw.2016.22, June 2016,
              <https://doi.org/10.1109/icdcsw.2016.22>.
   
   [Senel]    Şenel, B., Mouchet, M., Cappos, J., Fourmaux, O.,
              Friedman, T., and R. McGeer, "EdgeNet: A Multi-Tenant and
              Multi-Provider Edge Cloud", Proceedings of the 4th
              International Workshop on Edge Systems, Analytics and
              Networking, DOI 10.1145/3434770.3459737, April 2021,
              <https://doi.org/10.1145/3434770.3459737>.

[SFC-FOG-RAN]

              Bernardos, C. J. and A. Mourad, "Service Function Chaining
              Use Cases in Fog RAN", Work in Progress, Internet-Draft,
              draft-bernardos-sfc-fog-ran-10, 22 October 2021,
              <https://datatracker.ietf.org/doc/html/draft-bernardos-
              sfc-fog-ran-10>.
   
   [Shi]      Shi, W., Cao, J., Zhang, Q., Li, Y., and L. Xu, "Edge
              Computing: Vision and Challenges", IEEE Internet of Things
              Journal, vol. 3, no. 5, pp. 637-646,
              DOI 10.1109/jiot.2016.2579198, October 2016,
              <https://doi.org/10.1109/jiot.2016.2579198>.

[SimulatingFog]

              Svorobej, S., Takako Endo, P., Bendechache, M., Filelis-
              Papadopoulos, C., Giannoutakis, K., Gravvanis, G.,
              Tzovaras, D., Byrne, J., and T. Lynn, "Simulating Fog and
              Edge Computing Scenarios: An Overview and Research
              Challenges", Future Internet, vol. 11, no. 3, pp. 55,
              DOI 10.3390/fi11030055, February 2019,
              <https://doi.org/10.3390/fi11030055>.
   
   [Stanciu]  Stanciu, V., Steen, M., Dobre, C., and A. Peter, "Privacy-
              Preserving Crowd-Monitoring Using Bloom Filters and
              Homomorphic Encryption", Proceedings of the 4th
              International Workshop on Edge Systems, Analytics and
              Networking, DOI 10.1145/3434770.3459735, April 2021,
              <https://doi.org/10.1145/3434770.3459735>.
   
   [Tanveer]  Tanveer, S., Sree, N., Bhavana, B., and D. Varsha, "Smart
              Agriculture System using IoT", 2022 IEEE World Conference
              on Applied Intelligence and Computing (AIC), Sonbhadra,
              India, pp. 482-486, DOI 10.1109/AIC55036.2022.9848948,
              August 2022,
              <https://doi.org/10.1109/AIC55036.2022.9848948>.
   
   [Weiner]   Weiner, M., Jorgovanovic, M., Sahai, A., and B. Nikolie,
              "Design of a low-latency, high-reliability wireless
              communication system for control applications", 2014 IEEE
              International Conference on Communications (ICC),
              DOI 10.1109/icc.2014.6883918, June 2014,
              <https://doi.org/10.1109/icc.2014.6883918>.
   
   [Yangui]   Yangui, S., Ravindran, P., Bibani, O., Glitho, R., Ben
              Hadj-Alouane, N., Morrow, M., and P. Polakos, "A platform
              as-a-service for hybrid cloud/fog environments", 2016 IEEE
              International Symposium on Local and Metropolitan Area
              Networks (LANMAN), DOI 10.1109/lanman.2016.7548853, June
              2016, <https://doi.org/10.1109/lanman.2016.7548853>.
   
   [Yates]    Yates, R. and S. Kaul, "The Age of Information: Real-Time
              Status Updating by Multiple Sources", IEEE Transactions on
              Information Theory, vol. 65, no. 3, pp. 1807-1827,
              DOI 10.1109/tit.2018.2871079, March 2019,
              <https://doi.org/10.1109/tit.2018.2871079>.

[Yousefpour]

              Yousefpour, A., Fung, C., Nguyen, T., Kadiyala, K.,
              Jalali, F., Niakanlahiji, A., Kong, J., and J. Jue, "All
              one needs to know about fog computing and related edge
              computing paradigms: A complete survey", Journal of
              Systems Architecture, vol. 98, pp. 289-330,
              DOI 10.1016/j.sysarc.2019.02.009, September 2019,
              <https://doi.org/10.1016/j.sysarc.2019.02.009>.
   
   [Yue]      Yue, Q., Mu, S., Zhang, L., Wang, Z., Zhang, Z., Zhang,
              X., Wang, Y., and Z. Miao, "Assisting Smart Construction
              With Reliable Edge Computing Technology", Frontiers in
              Energy Research, Sec. Smart Grids, Vol. 10,
              DOI 10.3389/fenrg.2022.900298, May 2022,
              <https://doi.org/10.3389/fenrg.2022.900298>.
   
   [Zhang]    Zhang, Q., Zhang, X., Zhang, Q., Shi, W., and H. Zhong,
              "Firework: Big Data Sharing and Processing in
              Collaborative Edge Environment", 2016 Fourth IEEE Workshop
              on Hot Topics in Web Systems and Technologies (HotWeb),
              DOI 10.1109/hotweb.2016.12, October 2016,
              <https://doi.org/10.1109/hotweb.2016.12>.
   
   [Zhang2]   Zhang, J., Chen, B., Zhao, Y., Cheng, X., and F. Hu, "Data
              Security and Privacy-Preserving in Edge Computing
              Paradigm: Survey and Open Issues", IEEE Access, vol. 6,
              pp. 18209-18237, DOI 10.1109/access.2018.2820162, March
              2018, <https://doi.org/10.1109/access.2018.2820162>.

Acknowledgements

The authors would like to thank Joo-Sang Youn, Akbar Rahman, Michel Roy, Robert Gazda, Rute Sofia, Thomas Fossati, Chonggang Wang, Marie- José Montpetit, Carlos J. Bernardos, Milan Milenkovic, Dale Seed, JaeSeung Song, Roberto Morabito, Carsten Bormann, and Ari Keränen for their valuable comments and suggestions on this document.

Authors' Addresses

   Jungha Hong
   ETRI
   218 Gajeong-ro, Yuseung-Gu
   Daejeon
   34129
   Republic of Korea
   Email: jhong@etri.re.kr
   
   Yong-Geun Hong
   Daejeon University
   62 Daehak-ro, Dong-gu
   Daejeon
   300716
   Republic of Korea
   Email: yonggeun.hong@gmail.com
   
   Xavier de Foy
   InterDigital Communications, LLC
   1000 Sherbrooke West
   Montreal  H3A 3G4
   Canada
   Email: xavier.defoy@interdigital.com

Matthias Kovatsch
Huawei Technologies Duesseldorf GmbH
Riesstr. 25 C // 3.OG
80992 Munich
Germany
Email: ietf@kovatsch.net

Eve Schooler
University of Oxford
Parks Road
Oxford
OX1 3PJ
United Kingdom
Email: eve.schooler@gmail.com

Dirk Kutscher
Hong Kong University of Science and Technology (Guangzhou) No.1 Du Xue Rd
Guangzhou
China
Email: ietf@dkutscher.net